markk449

i know this is very noobish but will a turbo 13b manifold fit my 13b from my gls se?

markk449

can someone answer me?

K-Tune

iTrader: (26)

a stock one? no it'll hit your intake manifold.

markk449

is there any way i could make it fit or get one that fits

rolfs_7

yes....you can use the TII lower and upper intake mani along with the throttle body or make a spacer for the turbo mani... like Aaron Cake did on his>> http://www.aaroncake.net/RX-7/naturbo4.htm

coldy13

Yeah, you can space the turbo from the manifold, space the manifold from the engine, or use the TII intake manifold. If you can't make your own spacers then you can buy flanges and stack a couple of 'em until the turbo clears.

markk449

so if i got you guy, i just get a TII intake manifold and exhaust manifold and it will clear everything?

coldy13

TII's are 4port, I think you need an adapter to put in on a gsl-se since they're 6port. It's easier to just space the exhaust manifold and use the stock intake.

markk449

ok i got ya thanks for the help