seein7s

out of the three generations would any manifold fit the se bolt pattern. i saw something about 2nd gens intake manifold, filled with jb weld to fit se ports, but i can't find it anymore. if anybody has any info or links or pics that would be great
thanks jon

onepointone

i know the t2 manifold wont work because its a 4port motor, and the se is a 6port motor. i dont know if the n/a fc one will work, but i would imagine there would be some differences.

ioTus

iTrader: (5)

yeah either a s4 or s5 na intake will bolt right on. THATS WHAT THEY SAY.

No personal experience. Plus, i know you have to fill a few holes that the SE doesnt have, and if you use the s5 intake you have to wire open this valve thing( pretty much a thing that adds more low end torque, then opens up for high end. it runs off ecu/air pump on the 2nd gens. just wire it up).

Maybe you ahve to port match. i dont know.
~Geoff

O 16581 72452 5

I've got a TII gasket on my header the holes line up perfect...

O 16581 72452 5

DOH i read it as the exhaust manifold, lol

680RWHP12A

turbo 2 intake bolts right up the SE motor, but you need to port the t2 manifold to match the 6 port motor! it works!!!!! good too

p.s. some welding reqd.

chuck8313BTSDS

seein7s
Check out the link I have on my profile page. Did this on my car with good results, to me anyway. A Metal 6 port gasket was used.
chuck

Directfreak

iTrader: (2)

Her;s what you were looking for




By the way, the owner sold this setup to eddierotary, and has switched to a full TII setup.

eddierotary

iTrader: (7)

the intake bolts right up with no problems but youu have to port the intake so it match the gslse intake ports heres a pic of what you have to do

seein7s

thanks for the information, you did the filling on the t11 intake. i have a t11 complete intake system.

seein7s

also how much to match the ports on the turbo two intake

eddierotary

iTrader: (7)

i didnt do this, i brought the intake from david randall,he's the one who did it, i dont know what he use but it look like regular JB weld, and about the porting just get a gslse lower intake and just grind it ntill it match the ports on the gasket. heres his website http://www.winisp.net/gsl%2Dse/ if you need more info