transpland job
The good news is, it should be pretty straight forward. There's even a hole through the firewall for you to run the choke cable, and a blank in the dash for the choke ****.
The bad news is you're putting a 12A into a GSL-SE
The bad news is you're putting a 12A into a GSL-SE
yeah but my 79 runs great but body and inside is in bad shape and found a gsl se with full body kit and no motor cheap. the paint and everything is an great shape so for the price i was going to upgrade to gsl se brakes and suspention anyways so i get all the ups of the se cheap
Trending Topics
yeah but my 79 runs great but body and inside is in bad shape and found a gsl se with full body kit and no motor cheap. the paint and everything is an great shape so for the price i was going to upgrade to gsl se brakes and suspention anyways so i get all the ups of the se cheap
Still, if you have the engine and the chassis it does frankenstein two non-running 1st gens into one working one for a low cost.
if the 12a runs good put it in. You pretty much wil have a gsl with an lsd, bigger rear brake disks, and they are all vented. I would cut the se of of your emblems lol jk. Go for it if u can!!!
good luck
good luck
Thread
Thread Starter
Forum
Replies
Last Post



Good luck though.

