Not realted to Atkins Rotary- Where is Dan by the way?

Anyways how can I get a 81-85 carb to work on a 80 SA? The electrical crap is all different.

Thanks for any advise.....

 

 

I am still here just been working real hard on the C\F parts I should have a up date\Photos on that one in about a month.

As the carb goes can you bolt it to the manifold and not worry about the electrical stuff..


Later
Dan Atkins

 

I got the pleasure of riding in a car that was on the "Atkins Diet".
It was fun.

Are you trying to get the SA nest to actually work w/the later carb?

 

hey sterling... not to hijack the thread.. but are you still modding carbs? if you are i might be sending you one later in the summer..

 

and dan what kinda parts are you making in cf?

 

He was working on a steering surround in CF......

Sterling I am removing the rats nest!.. I hope..

 

If you're removing the nest then there's no problem. Just seal up the ports on the base plate.
Don't make the mistake of using one short piece of hose to cap two nipples because this can allow a leak into your idle. Each nipple needs to be capped individually.

 

Right now I am starting out with the head light plastic because it will fit from 79-85 with no problebm neXt I will start in the inside of the car after I get all of the parts that I need.

Dan

 

sweet... let us know when you have some available.. i would be very interested in that

 

Evil motors

will do ...

 

Remove rats nest, all other b/s off the carb and you should be good.