1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

suspension,carburator,choke & hot-assist cable

Thread Tools
 
Search this Thread
 
Old Jan 6, 2007 | 09:12 AM
  #1  
rotarypower01's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2006
Posts: 17
Likes: 0
From: haverhill, ma
suspension,carburator,choke & hot-assist cable

I appreciate the help i recieved on my previous question about the power mirrors, thanks . I have 3 questions one on suspension, one on carburator and where i could fine the choke & hot assist cable. 1. ? I was wondering if i could use the ground control (coil over) on the back to adjust my ride height or are there other options that could drop more than one inch with adjustability?. 2.Which carb is good for track and street use? I'm going all motor(high bridge) . 3 Where can i find the choke, & hot assist cables? I'll appreciate any help. Thanks.
Reply
Old Jan 6, 2007 | 11:04 AM
  #2  
Jeezus's Avatar
Stu-Tron Get Yo Groove On
Tenured Member: 15 Years
iTrader: (5)
 
Joined: Nov 2006
Posts: 8,482
Likes: 31
From: Huntsville AL
picture one is the hot start assist, picture two is the choke cable on the firewall. both pictures are from the drivers side. when you follow the cables to the carb, they should go:

top: choke cable
middle, slight right: throttle cable
bottom: Hot start assist

hope this helped some.
Attached Thumbnails suspension,carburator,choke & hot-assist cable-100_1556.jpg   suspension,carburator,choke & hot-assist cable-100_1557.jpg  
Reply
Old Jan 6, 2007 | 11:47 AM
  #3  
rotarypower01's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2006
Posts: 17
Likes: 0
From: haverhill, ma
choke

where can i buy the choke cable. I've called different parts store and they dont carry it.
Reply
Old Jan 6, 2007 | 11:58 AM
  #4  
Jeezus's Avatar
Stu-Tron Get Yo Groove On
Tenured Member: 15 Years
iTrader: (5)
 
Joined: Nov 2006
Posts: 8,482
Likes: 31
From: Huntsville AL
try www.rockauto.com
Reply
Old Jan 6, 2007 | 01:35 PM
  #5  
nick812's Avatar
13b P-port on a budget
Tenured Member 15 Years
 
Joined: Nov 2004
Posts: 3,003
Likes: 0
From: Louisville KY
Try the for sale section I might have 1 around.
Reply
Old Jan 6, 2007 | 01:45 PM
  #6  
mattreeve's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Sep 2003
Posts: 268
Likes: 0
From: Richmond, B.C
ill sell you mine for 50 cdn +shipping
Reply
Old Jan 6, 2007 | 01:46 PM
  #7  
mattreeve's Avatar
Senior Member
Tenured Member 05 Years
 
Joined: Sep 2003
Posts: 268
Likes: 0
From: Richmond, B.C
i also have the hot start if you need it 75 cdn plus shippin
Reply
Old Jan 7, 2007 | 12:49 AM
  #8  
twinkletoes's Avatar
Eats, Sleeps, Dreams Rotary
Tenured Member: 15 Years
iTrader: (17)
 
Joined: Apr 2006
Posts: 3,740
Likes: 6
From: Las Vegas, NV
While we are talking about the cables, How hard is it to take off all the cables attathed to the carb. The ones like above. I have the carb bolts all off, but the cables are still holding it on. Is it hard to put them back on too? Thanks guys

Last edited by twinkletoes; Jan 7, 2007 at 12:59 AM.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
mulcryant
General Rotary Tech Support
5
Oct 4, 2015 12:18 AM




All times are GMT -5. The time now is 10:35 PM.