Stainless V-band and U-bend supplier?
#3
Rotary Enthusiast
#4
Needs More Noise
iTrader: (12)
http://www.racepartsolutions.com/ - These guys have donuts as well.
http://www.globaltecheng.com/Product...?idCategory=31 - These guys are limited to 90 and 45 degree bends, but prices can't be beat.
-billy
#5
35r 13b first gen
iTrader: (3)
Join Date: Apr 2002
Location: Richland Center WI
Posts: 1,290
Likes: 0
Received 0 Likes
on
0 Posts
I got regular steel from them fast shipping and good products. that was 2.5 for my NA 12a now im going turbo 12a so im going to get 3 in from them probably... as long as i dont need 3.5 in
#6
The General RE
Thread Starter
You did not give us time
http://www.racepartsolutions.com/ - These guys have donuts as well.
http://www.globaltecheng.com/Product...?idCategory=31 - These guys are limited to 90 and 45 degree bends, but prices can't be beat.
-billy
http://www.racepartsolutions.com/ - These guys have donuts as well.
http://www.globaltecheng.com/Product...?idCategory=31 - These guys are limited to 90 and 45 degree bends, but prices can't be beat.
-billy
#7
The General RE
Thread Starter
Columbia River Mandrel Bending http://www.mandrel-bends.com/
I got regular steel from them fast shipping and good products. that was 2.5 for my NA 12a now im going turbo 12a so im going to get 3 in from them probably... as long as i dont need 3.5 in
I got regular steel from them fast shipping and good products. that was 2.5 for my NA 12a now im going turbo 12a so im going to get 3 in from them probably... as long as i dont need 3.5 in
Trending Topics
#8
The General RE
Thread Starter
#10
Needs More Noise
iTrader: (12)
#11
The General RE
Thread Starter
#12
The General RE
Thread Starter
Thanks for all the help finding components to make my exhaust system. It turned out pretty well, but I need to add a little flex to my down pipe.
Does anyone know where I can find a 3" version of a ball joint with a graphite SS mesh gasket like this?
Or...should I give up looking and add a flex coupling like this:
http://vibrantperformance.com/catalo...oducts_id=1013
Does anyone know where I can find a 3" version of a ball joint with a graphite SS mesh gasket like this?
Or...should I give up looking and add a flex coupling like this:
http://vibrantperformance.com/catalo...oducts_id=1013
#13
35r 13b first gen
iTrader: (3)
Join Date: Apr 2002
Location: Richland Center WI
Posts: 1,290
Likes: 0
Received 0 Likes
on
0 Posts
i would use the flex piece... thats what i put on my 3.5 in stainless system... i think that it allows for more flex once it is installed... the ball connector is more to make it easier to fit initailly... correct me if im wrong... i got a similar ss flex piece and really like it
#15
The General RE
Thread Starter