Guys we have a GB thread for these:

https://www.rx7club.com/group-buy-center-69/1979-1985-12a-rx7-markii-big-brake-kit-677216/

You should keep a list going with username, year and model there. It is running until 8/20.

-billy

 

GB is supposed to end today. Have not generated enough interest as of yet. Do we need to give it more time? Lots of guys showed interest for us to get the kit out.

https://www.rx7club.com/showthread.php?t=677216

-billy

 

Would you mind shipping to Austalia? We might get some takers on Ausrotary.com I believe all of their series 3 rx7's (84-85) had the gsl-se pattern.

 

We ship world wide. We are not a paying vendor over there so I am hesitant to post it.

-billy

 

OK, I have a friend over there. I'll have him spread the word.

 

Keep up the good work Billy,

I just checked how much I'm at money wise to buy from your website alone and i'm close to 2600$ without shipping. I'll take it that be close to 3000$ with all the shipping invovled.Once I'm done with that welding school and start making a bit better money, you're my next shop on the list to shop at. I need to get all the essential stuff first

 

Sweet.....School is important.

When you get ready, we will be here.

-billy

 

What's the price for the complete set, and all 5 braided lines for a 80 with a 82 GSL Rearend, shipped to 60622?


--Evan

 

You can go to our catalog and put the parts in your cart to calculate shipping. It will tell you the shipping cost before you give it CC info.

Brake kit:
http://www.mrcmfg.com/respeed/catalo...8ddb7982e943bd
Line Kit:
http://www.mrcmfg.com/respeed/catalo...8ddb7982e943bd

We also have the chassis to rear end line listed at $24.50. We can sell that for $20 when purchased at the same time as a brake kit or line kit.


-billy

 

quick question billy, so now you have a big brake upgrade for the 79-83 gsl struts. so does that mean i can do the TII big brake upgrade and get the 5 lug with it if i use your adapter kit PLUS this kit? and the obvioulsy TII stuff?

so run down...83 rx7, i want 5 lug and big brakes?

 

^^ the 81-83 is only for four lug, IIRC, but you still get the big brakes. for you to get 5x114 youll need to get any 84-85 front strut tubes/spindles. these are easy to come buy and should be cheap to aquire. i dont know if you plan on staying with the stock rearend, i assume no, but if you do you need ANY 84-85 disc brake rearend housing and third member. then get the moser axles through respeed.

ive done this, 100% worth it.

 

Yep, 5 lug swaps use the Mark I big brake kit. Front or Rear. As AWS140 stated, you will need 5 lug axles and 84-85 disk brake housing to do the rear swap and 84-85 strut housings to do the front kit.

Mark II kit is only for 4 lug (4 x 110MM and 4 x 113.5MM) patterns. No rear kit available.

-billy

 

Where has all the interest gone people! So many people were thrilled to see this kit offered, but it seems once the light turned on everyone ran like roaches! *hehe*

 

Yep, I can't believe there's not more interest. I was hoping to get the se set made.

 

I just discovered this today. This is what i've been waiting for. Put me on the list for the S3 MkII kit if this is still something in progress.