well here is a video of my RX7 Running. i think i need a new fuel pump or my fuel filter.

part one
http://ca.youtube.com/watch?v=cl4UxWVXRo8

part two (looking over the motor to show how we get it running)
http://ca.youtube.com/watch?v=cZmQFVxD_io

PS: there was alot of smoke

hope you like the video

 

clever


thats a ton of smoke!!!


congrats!!!!! she runs!!!

 

You have a funny accent


Glad ya got 'er started!

 

Also the first link does not work

 

i know here are better links


part 1
http://media.putfile.com/rx7-12A-start-up

part 2
http://media.putfile.com/RX7-12-start-up-part-2

 

Haha that's pretty ghetto, well at least you know it will start.

Now get that Sterling Nikki you'd allways wanted.

 

Thats great you got it started.....Kinda sounds like an angry weedwacker!

 

AHAHAHAHAHa it does. i should get a new muffler to sound better.

 

Thank you, thank you, I have never laughed so hard.

 

It's like a train wreck........You know it's going to be bad, but can't help but to look. I don't suppose you can get someone to ride on the fender with a squirt bottle going down the road? Now that would be funny .

 

no i will put a hand pump in the car so i can pump in from inside.

we dont know the reason why gas is not pumping it mite be the fuel filter or the fuel pump

 

Check the filter if you haven't already. $5 part and in a car that's 24 years old, lots of stuff has gone through the line, pretty easy to gunk that up.

 

umm i dont have a accent.

 

*squirt* Brap *squirt* Brap *Squirt* Brap!

ROFLMAO that is great, squirt bottle straight to the carb, now that's the way to do it!

 

I feel bad for the guy with the massive hand cramp! LOL

 

some after math.


i need to ask. this is right behind the trany. i can see inside and see gears should there be a plug there and trany fluid?

 

Should be a plug there (doesn't matter too much though) but that is just part of the bellhousing that shrouds the flywheel and clutch. In other words, no fluid, your just seeing the flywheel when you look in there.

Good to see that it's running!

 

i cannot believe that noone has mentioned that the car is only running on 1 rotor. I'd say it's blown... You deffinatly have at least chipped apex seals because you can hear the compression leaking throught the carb....

 

Please tell me that's frost on your rear bumper and not fiberglass/epoxy

 

its fiber glass. but i am ripping that off soon and puting metel.

Dan_s_young: thanks for the info.

Hyper4mance2k: dont sound like its only have 1 rotary spining

 

1 rotor

If one rotor isn't running it'll still turn silly :P


I'll agree with Hyper4mance2k it doesn't sound right, I know squirting gas into the carb isnt the best but that'd a valid method it'll suck the gas into both rotors enough to burn, yet it doesn't sound like my friends 12a that I worked on at all.

 

i know i messed up. but it sounds like both rotarys are firing. remember i have no muffler on and the donut from the head to the muffler has a hole in it so i need a new one.

 

i've been doing this rotary thing for over 12 years now. your engine is done...

 

But both rotarys are firing?

 

I agree, something is definently not right.