Is this a -se? Local junkyard find by a frirbd
Thread Starter
Joined: Oct 2001
Posts: 6,444
Likes: 0
From: Fort Branch, Indiana
Is this a -se? Local junkyard find by a frirbd
A friend of mine sent me these pics says its at a place 10 miles away. Is this a SE? Says motor is gone. But pull a part place means cheap. Some body was wanting a suspension swap? Is see studs sticking out for wheels and no choke ****. Need parts better get at me.
Correctly plugged choke **** hole.
Although not 100% sure it looks like vented rear disc brakes.
The missing GSL-SE badge on the left rear looks like there was a missing GSL-SE badge as all other badges in that space are narrower.
Painted mirrors are another clue.
Did I miss anything?
Although not 100% sure it looks like vented rear disc brakes.
The missing GSL-SE badge on the left rear looks like there was a missing GSL-SE badge as all other badges in that space are narrower.
Painted mirrors are another clue.
Did I miss anything?
Thread Starter
Joined: Oct 2001
Posts: 6,444
Likes: 0
From: Fort Branch, Indiana
I saw the studs sticking out of the rotors. 114.3 lug pattern. I'm not really needing much. Might take the doors and dash. I could pull the rear and front suspension but I don't need them. Only do it to make money.
Trending Topics
The SE air cleaner box lid is punched full of holes and laying on the passenger floor in front of the seat.
You can easily sell the front and rear calipers (make sure you get the brackets), the Ebrake cables, the rear pumpkin, the PS box, the wiper motor, the rear drivers side glass w/good decal, tail lights, tail center panel, the hinges for the hatch louvers (at top of glass), ashtray, dash vents, red wheel, front strut spindles, rear axle shafts, the FMOC, and on and on.... Those are all desirable and sought after parts.
You can easily sell the front and rear calipers (make sure you get the brackets), the Ebrake cables, the rear pumpkin, the PS box, the wiper motor, the rear drivers side glass w/good decal, tail lights, tail center panel, the hinges for the hatch louvers (at top of glass), ashtray, dash vents, red wheel, front strut spindles, rear axle shafts, the FMOC, and on and on.... Those are all desirable and sought after parts.
The SE air cleaner box lid is punched full of holes and laying on the passenger floor in front of the seat.
You can easily sell the front and rear calipers (make sure you get the brackets), the Ebrake cables, the rear pumpkin, the PS box, the wiper motor, the rear drivers side glass w/good decal, tail lights, tail center panel, the hinges for the hatch louvers (at top of glass), ashtray, dash vents, red wheel, front strut spindles, rear axle shafts, the FMOC, and on and on.... Those are all desirable and sought after parts.
You can easily sell the front and rear calipers (make sure you get the brackets), the Ebrake cables, the rear pumpkin, the PS box, the wiper motor, the rear drivers side glass w/good decal, tail lights, tail center panel, the hinges for the hatch louvers (at top of glass), ashtray, dash vents, red wheel, front strut spindles, rear axle shafts, the FMOC, and on and on.... Those are all desirable and sought after parts.
Ill take the front left complete strut housing with spring, caliper, rotor and brake plz the whole thing, ive had an ad in for sale section, that would help me complete my car and finally get it on the road
Thread Starter
Joined: Oct 2001
Posts: 6,444
Likes: 0
From: Fort Branch, Indiana
I got a whole garage full of parts. Lol I tried selling and I didn't get any bites in it. I once pulled a LSD from a GXL for somebody and got stood up on it. Bought never got rid of it. If people got money where the mouths are. LOL. I'll go strip the car.
Well that suxs I was hoping nobody would find her till I got a chance to pull my parts, lol. It is a se 114.3 bolt pattern. It's been sitting at that lot for about a month now maybe a month and a half. Most the cars there including original owners manual. When I looked at her she only had the motor and tranny pulled with a few other under hood components gone.
I was looking to get the rear axle caliper to caliper with ebrake hardware for my baby girl but it'll probably be gone by the time I get a chance to make it over there. Owell better luck next time.
I was looking to get the rear axle caliper to caliper with ebrake hardware for my baby girl but it'll probably be gone by the time I get a chance to make it over there. Owell better luck next time.
Thread
Thread Starter
Forum
Replies
Last Post







