1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

rotary question

Thread Tools
 
Search this Thread
 
Old 04-12-08, 09:01 PM
  #1  
Junior Member
Thread Starter
 
boricua74rx7's Avatar
 
Join Date: Mar 2008
Location: Lake Charles
Posts: 20
Likes: 0
Received 0 Likes on 0 Posts
rotary question

i have a 82 rx7, half bridge ported 13b,with the after market intake a 650 holley double pumper MSD coils, 82stock ignition the car runs fine but when it get to 6000,6500 it misses.any suggestions on how to fix this?
Old 05-20-08, 08:00 PM
  #2  
Rotating

 
Jimbo II's Avatar
 
Join Date: Jan 2008
Location: New Zealand
Posts: 604
Received 6 Likes on 2 Posts
Yeh plugs, clean them? Mine was missing at about 7500 but went sweet again at about 9000. Then got MSD, 10mm leads for a beefy spark and since then its sweet
Old 05-20-08, 08:17 PM
  #3  
1200 gone......but......

iTrader: (24)
 
RXnos1200's Avatar
 
Join Date: Oct 2006
Location: so cal
Posts: 902
Likes: 0
Received 0 Likes on 0 Posts
missing at 6500 rpm? you mean hesitation or break up? What fuel pump are you running and what do you have the psi set to? Make sure your floats are set at the right height. I think maybe you are running out of fuel at top end. Does it do it in 3rd gear? Does it do it in 1st and 2nd gear? need more info.
Old 05-20-08, 08:30 PM
  #4  
Lives on the Forum

 
Kentetsu's Avatar
 
Join Date: Jun 2004
Location: Grand Rapids Michigan
Posts: 11,359
Received 14 Likes on 11 Posts
Could be a timing issue...
Old 05-20-08, 09:41 PM
  #5  
1200 gone......but......

iTrader: (24)
 
RXnos1200's Avatar
 
Join Date: Oct 2006
Location: so cal
Posts: 902
Likes: 0
Received 0 Likes on 0 Posts
missing like detonating? ^^^^^^^^^ got to look over everything
Old 05-20-08, 10:17 PM
  #6  
djessence

 
djessence's Avatar
 
Join Date: Aug 2007
Location: Alberta, Canada
Posts: 2,062
Received 0 Likes on 0 Posts
Originally Posted by chico708
need a little help got a 87 rx7 that wont stay running
Did the OP ever get help cuz its an old thread (like a month)


for the other guy.......try the second gen section (86-91 cars)
Old 05-26-08, 08:03 PM
  #7  
Junior Member
Thread Starter
 
boricua74rx7's Avatar
 
Join Date: Mar 2008
Location: Lake Charles
Posts: 20
Likes: 0
Received 0 Likes on 0 Posts
i got it fixed,my jets were to small.I now have 65 for low and 67 for high and fuel pomp at 7psi.
Old 05-27-08, 06:54 PM
  #8  
Junior Member
 
chico708's Avatar
 
Join Date: May 2008
Location: pa
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by djessence
Did the OP ever get help cuz its an old thread (like a month)


for the other guy.......try the second gen section (86-91 cars)
no luck with starting the car
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
msilvia
3rd Generation Specific (1993-2002)
28
04-14-16 12:58 PM
turbo-minivan
Introduce yourself
3
08-27-15 07:56 AM
elfking
3rd Generation Specific (1993-2002)
3
08-19-15 09:48 PM
Professorpeanutrx7
New Member RX-7 Technical
5
08-15-15 01:38 PM



Quick Reply: rotary question



All times are GMT -5. The time now is 11:04 PM.