CoupeSprinter

Hi, new to the forums.
Unfortunately I don't own an RX7, I have two AE86 Corollas.
I'm actually here looking for reference photos and information.

I'm working on a plastic model car project, 1979 SA22C IMSU Spec RX7 with a 13B turbo rotary. And needed some reference photos of the car, mainly the engine bay. I looked at your "Post Pics" page, and found great stuff.

Photos of any SA or FB cars would be helpful.

Well, if anyone can help me I was looking for photos of:
- Under face of hood, to see the hood skeleton.
- A layout of engine bay wire harness, just for an idea.
- Throttle body/ intake manifold
- Any other close-ups of engine bays.

Just so you have an idea of what I'm working with:

trochoid

iTrader: (6)

The 1st gens did not come with a 13BT, only the 2nd and 3rd gens. There are 3 genereal variations of those engines, along with the 13B RE.

In my sig line is a link to the online FSMs,. Perhaps the line drawings in those may be of more use than pics.

CoupeSprinter

Thanks, I was just looking at the FAQ.
Great stuff!

Well, for modeling purposes I can only get my hands on a 13BT engine. In fact my model chassis, interior and engine is from a FC kit. So it also will have IRS. I'm basically building a FC with a SA body.

Not quite an accurate model due to the limitation of available model parts and kits.

DAVID GRIMES

That's the problem we have: Trying to get certain parts. Good luck.

DriftFB

Where did you get that model?

Do you want me to just take a photo of the underside of a factory hood?

And tell me a little about your Corollas.

ME-B-N-ME

I want a Corolla V.V

Hyper4mance2k

iTrader: (40)

here

CoupeSprinter

Thanks for the replies!
I got the model from a local hobby shop.
And yes, just a photo of the underside if possible.

So far I have only owned Corollas.
My first being a 1987 SR5 in highschool.


I then purchased a 1987 GTS


Lastly I bought a 1987 SR5


And did a full GTS conversion using my previous car as a parts car.




Done:

blwfly

iTrader: (4)

wow thats a nice collection of corollas do they empty your pockets?

85rotarypower

I have a pic of the skeleton under the hood. Hope its good enough.

Those are nice corollas you have there. Good luck with your model.

DriftFB

Looks like some one beat me to the photo.

Nice Corollas though, at first I was going to say you really like the baby supra wheels but then in one of the rebuilding photos you had some different wheels on there.

851stgen12a

OK!!! You have to tell me everything you can about that model!!! I WANT ONE!!! I have been looking for an FB model for years!! nothing!!!

Awesome AE86's... my buddy is really into those..
I have an AE71 (83 wagon) that im working on doing a complete AE86 setup on.. 4A-gze, rear IRS swap, ect.... ought to make a really cool somewhat unique drift car!!!

CoupeSprinter

There are actually quite a bit of SA models available, most of them of IMSA race cars:

Aoshima:




Fujimi:




Arii:


The kits above are pretty low on detail, originally designed to be motorized and has virtually NO interior.


There are also SA manufactured by Monogram which may be available on ebay.

Here's the only FB I know of from Tamiya:


Good luck finding a kit.

Celica Supra rims are very nice fit for the Corolla.
Currently I have a mix of SSR MK3 rims and some Centerlines (seen below on my old car):


Any other photos can be useful.

Thanks!

DriftFB

thats some good info on model kits, I want to get one of each, thanks.