Rear Height Adjusters?......
Thread Starter
Eats, Sleeps, Dreams Rotary
iTrader: (52)
Joined: Oct 2001
Posts: 3,902
Likes: 10
From: NJ
Rear Height Adjusters?......
I was going to post this in the recent coil-over thread but I thought it might get more attention out on it's own.
I started my quest looking for a full height adjustable kit. The Respeed front kit is a no brainer for cost and effectiveness. When it came to the rear, I was turned to only find one place......www.iscracing.net
When I spoke with ISC Racing about their rear height adjusters, the represenitive said they had just sold their last set yesterday and that they are currently discontinueing all of their RX7 line and going with Miata racing supply.
Does anyone know where I could find these?
I know I could make them but my machining resources are limited.
And the million dollar question........
Is REspeed planning to continue the ISC Racing design and make these babies?
I started my quest looking for a full height adjustable kit. The Respeed front kit is a no brainer for cost and effectiveness. When it came to the rear, I was turned to only find one place......www.iscracing.net
When I spoke with ISC Racing about their rear height adjusters, the represenitive said they had just sold their last set yesterday and that they are currently discontinueing all of their RX7 line and going with Miata racing supply.
Does anyone know where I could find these?
I know I could make them but my machining resources are limited.
And the million dollar question........
Is REspeed planning to continue the ISC Racing design and make these babies?
Rotary Freak
Joined: Oct 2002
Posts: 2,410
Likes: 2
I was going to post this in the recent coil-over thread but I thought it might get more attention out on it's own.
I started my quest looking for a full height adjustable kit. The Respeed front kit is a no brainer for cost and effectiveness. When it came to the rear, I was turned to only find one place......www.iscracing.net
When I spoke with ISC Racing about their rear height adjusters, the represenitive said they had just sold their last set yesterday and that they are currently discontinueing all of their RX7 line and going with Miata racing supply.
Does anyone know where I could find these?
I know I could make them but my machining resources are limited.
And the million dollar question........
Is REspeed planning to continue the ISC Racing design and make these babies?
I started my quest looking for a full height adjustable kit. The Respeed front kit is a no brainer for cost and effectiveness. When it came to the rear, I was turned to only find one place......www.iscracing.net
When I spoke with ISC Racing about their rear height adjusters, the represenitive said they had just sold their last set yesterday and that they are currently discontinueing all of their RX7 line and going with Miata racing supply.
Does anyone know where I could find these?
I know I could make them but my machining resources are limited.
And the million dollar question........
Is REspeed planning to continue the ISC Racing design and make these babies?
Check around on circle track supply sites likehttp://www.speedwaymotors.com
You'll find bigger spring perches but you'll probably need shorter springs to use them.
You'll find bigger spring perches but you'll probably need shorter springs to use them.
In the past we saw no reason to make them. We only saw one change that we thought would make them better and we could not manufacture them any cheaper.
After we caught wind that ISC was not going to have them any longer I called and spoke with Mike. He informed me they would no longer carry them along with most of the first generation bit he had.
We decided to work up the numbers. The rough numbers look like the kit will run $145.00. Springs will run around $110 per pair. The prices are slightly higher than ISC had them for. This is currently not at the top of my list with the rack kit and 110MM big brake kit being at the top.
We can move forward more quickly if a group buy was set up and had a number of guys looking to purchase. Say 5 kits. So, lets here some feedback and see if it warrants a GB.
-billy
Rotary Freak
Joined: Oct 2002
Posts: 2,410
Likes: 2
In the past we saw no reason to make them. We only saw one change that we thought would make them better and we could not manufacture them any cheaper.
After we caught wind that ISC was not going to have them any longer I called and spoke with Mike. He informed me they would no longer carry them along with most of the first generation bit he had.
We decided to work up the numbers. The rough numbers look like the kit will run $145.00. Springs will run around $110 per pair. The prices are slightly higher than ISC had them for. This is currently not at the top of my list with the rack kit and 110MM big brake kit being at the top.
We can move forward more quickly if a group buy was set up and had a number of guys looking to purchase. Say 5 kits. So, lets here some feedback and see if it warrants a GB.
-billy
After we caught wind that ISC was not going to have them any longer I called and spoke with Mike. He informed me they would no longer carry them along with most of the first generation bit he had.
We decided to work up the numbers. The rough numbers look like the kit will run $145.00. Springs will run around $110 per pair. The prices are slightly higher than ISC had them for. This is currently not at the top of my list with the rack kit and 110MM big brake kit being at the top.
We can move forward more quickly if a group buy was set up and had a number of guys looking to purchase. Say 5 kits. So, lets here some feedback and see if it warrants a GB.
-billy
Savanna Rx-7
Joined: Jun 2004
Posts: 1,577
Likes: 12
From: yokosuka japan
In the past we saw no reason to make them. We only saw one change that we thought would make them better and we could not manufacture them any cheaper.
After we caught wind that ISC was not going to have them any longer I called and spoke with Mike. He informed me they would no longer carry them along with most of the first generation bit he had.
We decided to work up the numbers. The rough numbers look like the kit will run $145.00. Springs will run around $110 per pair. The prices are slightly higher than ISC had them for. This is currently not at the top of my list with the rack kit and 110MM big brake kit being at the top.
We can move forward more quickly if a group buy was set up and had a number of guys looking to purchase. Say 5 kits. So, lets here some feedback and see if it warrants a GB.
-billy
After we caught wind that ISC was not going to have them any longer I called and spoke with Mike. He informed me they would no longer carry them along with most of the first generation bit he had.
We decided to work up the numbers. The rough numbers look like the kit will run $145.00. Springs will run around $110 per pair. The prices are slightly higher than ISC had them for. This is currently not at the top of my list with the rack kit and 110MM big brake kit being at the top.
We can move forward more quickly if a group buy was set up and had a number of guys looking to purchase. Say 5 kits. So, lets here some feedback and see if it warrants a GB.
-billy
I am in on a group buy if you start one. would like 3.8~4 kilo springs (200~225 ish)
kenn
Trending Topics
i would possibly be in this buy but i would need to see a picture of the setup, as im about to forego my own setup (acutal full coilovers) and if this would seem feaseble i would be in....
Savanna Rx-7
Joined: Jun 2004
Posts: 1,577
Likes: 12
From: yokosuka japan
Savanna Rx-7
Joined: Jun 2004
Posts: 1,577
Likes: 12
From: yokosuka japan
MODS can we make this qan official group buy?
Mods,
should this be moved to the group buy area? if so pretty please? Would really like to see this group buy get rolling as soon as possible.
cheers
Kenn
should this be moved to the group buy area? if so pretty please? Would really like to see this group buy get rolling as soon as possible.
cheers
Kenn
Thread has been made -> https://www.rx7club.com/group-buy-center-69/1979-1985-rx7-rear-coil-over-kit-respeed-676373/
-billy
-billy
Savanna Rx-7
Joined: Jun 2004
Posts: 1,577
Likes: 12
From: yokosuka japan
he he he, I already paypalled billy the cash...... He has my paypal address on the top of his charge accounts so that as soon as he comes up with something cool he can jsut send me a bill 
its a good thing my wife has not figured out paypal yet
she keeps asking me where all of these strange charges are coming from in the US 
kenn
its a good thing my wife has not figured out paypal yet
she keeps asking me where all of these strange charges are coming from in the US kenn
Thread
Thread Starter
Forum
Replies
Last Post
primerGrey
Suspension/Wheels/Tires/Brakes
10
Aug 25, 2015 02:46 PM
