Rats nest removal..
#1
Get the shovel and boots!
Thread Starter
iTrader: (2)
Join Date: Jan 2007
Location: Cleveland,OH
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
Rats nest removal..
after going through this write up http://maz_tutorials.ten15.net/Tutorial_1.pdf and doing it i only have one ? it says to disconnect the oil vent hose from the fire wall on page 14... well i have the one from the fire wall for the charcoal canister that goes just a little past the oil fill tube and one coming off the fill tube which was connect to the black valve... now i connect the black valve to the oil fill tube line and left the one to the charcoal canister connect in tact? is this the proper way? or should i leave the fill tube vented and connect the valve to the second line which goes to the charcoal canister?
#2
My 7 is my girlfriend.
iTrader: (5)
Join Date: Feb 2006
Location: London, Ontario, Canada
Posts: 3,162
Likes: 0
Received 1 Like
on
1 Post
Leave the charcoal canister as it is, the vent line from the oil fill tube gets re-routed to a nipple (haha I said nipple) on the carburetor. I don't have pics handy but, it's the largest one, near the top left.
#3
Have RX-7, will restore
iTrader: (91)
Love the avatar TheDriver216!! try this link for an EXCELLENT writeup: https://www.rx7club.com/1st-generation-specific-1979-1985-18/my-new-rats-nest-662907/
#4
Get the shovel and boots!
Thread Starter
iTrader: (2)
Join Date: Jan 2007
Location: Cleveland,OH
Posts: 273
Likes: 0
Received 0 Likes
on
0 Posts
Love the avatar TheDriver216!! try this link for an EXCELLENT writeup: https://www.rx7club.com/showthread.php?t=662907
Thread
Thread Starter
Forum
Replies
Last Post
LongDuck
1st Generation Specific (1979-1985)
12
10-07-15 08:12 PM
ls1swap
3rd Generation Specific (1993-2002)
12
10-01-15 07:58 PM