IanS

iTrader: (4)

I know this has been beat to death, but I couldnt find a real answer after searching.

I have removed AC, cruise, all excess BS.

On the nikki carb, I have 6 (I think) vac lines coming out. which ones go to vac advances on dizzy?

Gimme a "number 1 (from left) goes to leading, and 2 goes to trailing". Or something like that. Do I need the T in the line coming from the oil fill tube hose, or does it just run straight to that thing that it plugs into (cant remember right now)?

Help me out here. Which ones are plugged and which ones are used? Do I hook up both vac advances to one vac line or do they each go to a seperate line from the carb? If they even go to the carb.

Ahh I think I just confused myself AGAIN....

Help me out people

Thanks
IanS

7droptop

iTrader: (1)

bump

Rx7carl

Have you read the tutorial? Its all spelled out in there, step by step.

RotaryRyan

IIRC, you run both lines from the dizzy to a tee. then one line off the tee to the 2nd from the left hole on the carb spacer. Read the tutorial though, i could be wrong.

cdrad51

Obviously not, or he wouldn't be asking those questions now would he?

http://www.ten15.net/Maz.tutorials

7droptop

iTrader: (1)

actually he has them printed off and i am helping him with this project the tutorial shows you how to hook them back up to an a/c system and cruise well we eliminated both of those thats why he is asking thanks for the insight though
oh yeah bump !

Rx7carl

Oh, well then just delete those connections. Just cap it.