1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Random idle question.

Old Sep 5, 2006 | 12:58 PM
  #1  
Naegleria_Fowleri's Avatar
Thread Starter
Terrified.
Tenured Member 10 Years
 
Joined: Oct 2004
Posts: 3,463
Likes: 1
From: Muncie, IN
Random idle question.

Up until last night my idle was right near 1,000 rpms. Yeah I know its a little high, but from what I've read up on that most people with a Holley 465 Racing Beat setup runs a pretty high rpm. Anyway, now comes the problem. Last night I was hanging out with some friends, and on my way home I noticed that my idle stayed up at 2,000 rpms. Sometimes going all the way up to 3,000 rpms. Most of the time kicking the pedal back and stuff fixes it, but I couldn't get it down lower than 2,000 rpms. I was today it was doing the same thing.

Is it just time to retune the carb thanks to the weather being a bit colder, or do you think something is getting stuck open with the carb? The carb is pretty much brand new. Less than a couple months old.
Reply
Old Sep 5, 2006 | 04:31 PM
  #2  
jjlrx7's Avatar
Full Member
Tenured Member 15 Years
 
Joined: Feb 2003
Posts: 164
Likes: 3
From: San Antonio, Texas
had the same prob. i sprayed it inside and out with carb cleaner, let it sit and hit it again. i have done this 2 or 3 times already and it works better if u take it off but dont have to. dont know what causes yours, but mine has something to do with angle of the oil feed lines in the carb ( the 2 metal hoses inside the body ). i was told to bend them GENTLY downward. works thus far.
Reply
Old Sep 5, 2006 | 04:51 PM
  #3  
SPERRYsan's Avatar
OHhh yea
Tenured Member 10 Years
iTrader: (1)
 
Joined: Dec 2004
Posts: 213
Likes: 0
From: Merica
what do you have for a throttle return spring on there?
its a harder pedal but pulls it back if its only a binding problem
check the arm and lobe for the accelerator pump as well
the arm sometimes rolls off to the side and can cause some binding aswell
not to mention acceration problems
check your fuel pressure
my holley only ran good below 4psi
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
gxl90rx7
Haltech Forum
6
Jun 30, 2017 11:30 PM
Donald Hampton
2nd Generation Specific (1986-1992)
5
Sep 17, 2015 03:13 PM
msilvia
3rd Generation Specific (1993-2002)
15
Sep 11, 2015 12:13 PM
RotaryBobby
1st Generation Specific (1979-1985)
1
Sep 10, 2015 01:33 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 07:50 AM.