we are running a no key igntion...which wires on the back of the ignition switch are the constant the ignition and the starter?

 

cmon some one has to know

 

you waited 20 mins to bitch? give it time, jeesh. Some people have lives yah know......

 

In the 20mins you waited did you search the forums? I swear I saw instructions in here before on how to install a push button deal..


Found the link... Now search for it!!

 

Use the bleedin key and forget trying to be different

 

no they have some ignition button instructions for a 2nd gen and uhh yea we dont have a key

 

bizump

 

some things to remember. I"m not sure what all needs power to function but the coils do, piece of cake with toggle switch. and you also need to have power to the starter solenoid as well. Really all you need is a master on/off switch since you need tailights wipers, headlights, all that fun stuff. you would need to bypass the stock ignition with a switch. then just have a push button for the starter. not too sure on all this but its how we have it on our race car. yea i know that doesn't apply but just think simple and work from that. hope this helps point you in the right direction.

Ron

 

Do the search again...it's here...I think it was Mike-P-28 who posted it in reply to a thread just like this one...

 

isn't the FC ignition switch basically the same as an FB? i replaced the one in my FC,a nd the other day i was looking at the one in my FB, and it looked like the exact same setup

 

i have one in my car but you still have to have something to turn on your fuel pump...

 

I just answered this about 2 weeks ago

http://www.rotorhead.ca/ref_startbutton.php

 

Or, look around for the wiring diagram. Hint: iluvmyrx7.com

 

i did it using the instructions i found on here...do a search and you should find them alright...

 

go here

https://www.rx7club.com/showthread.p...t=start+button

 

sweet deal thanks got it all wired up