Pulling engine..... Need HELP NOW!!!!!!
#1
Full Member
Thread Starter
Join Date: Oct 2004
Location: Tucson
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
Pulling engine..... Need HELP NOW!!!!!!
So Ive removed all my bolts and lines, and now it has come time to pull the engine, except for the fact that it seems that it doesnt want to come. I can get a gap from where the tranne and motot meet up, but I just cant get it to come apart!!! Please help.. now!!!!!! Only three more hours till i have to leave for work!!!!
#3
make sure you removed the bolt that was under strart isnt there. It hidden when the starter is in place. If you have ALL of the bolts removed, pry it apart with a bar, or tire iron.
#5
southernrunner
Join Date: Jan 2005
Location: Des Allemands, La
Posts: 1,207
Likes: 0
Received 0 Likes
on
0 Posts
The bolt is going to be hidden by the starter, I ran into the same problem, I thought I had all the bolts out and I didn't. You have to take the starter out. After that you should be able to take a screw driver and pull it apart. I used one of the 3 motors I had out as a reference as to how many bolts they had to take out. Let me know how that goes.
Trending Topics
#8
Full Member
Thread Starter
Join Date: Oct 2004
Location: Tucson
Posts: 123
Likes: 0
Received 0 Likes
on
0 Posts
HA hahahaha that was it!!!! Sweetness!!! Now I just need a cople frinds to get over here to lift it up!! Time for da rebuild process to get started. Should be running by next year!
#9
southernrunner
Join Date: Jan 2005
Location: Des Allemands, La
Posts: 1,207
Likes: 0
Received 0 Likes
on
0 Posts
haha...I finally got it right. lol Yeah just make sure you put the parts together and label them, I didn't label mine and I know its going to take forever and a year to get mine back in. I am actually putting a streetported s5 n/a. Good luck with the rebuild.
Thread
Thread Starter
Forum
Replies
Last Post
rotor_veux
2nd Generation Specific (1986-1992)
3
09-28-15 09:25 PM