Id love to here some bridgeport soundclips if you got em. Especially if you have straight pipes cause im planning on putting straight pipes on my car soon.

 

http://www.mypage.tsn.cc/wankel/rotor.mp3 Thats mine

 

nice sound clip but it would be nice to hear the engine revving

 

i hear lots or bridgeys.... how about some p-ports

 

That sounded nice.

 

The red 3rd gen has a 13b Peripheral Port. Kinda hard to hear but the video is sweet.

The in car video mazdatrix.com car is a 12a stockport with some upgrades to the Nikkei and open exhaust.

http://mazdatrixmovies.com/lapg.mpg

 

It isn't a bridge port. Not a P port either. Is that ok?

I don't even know if these links will work.
http://www.nopistons.com/forums/inde...post&id=527672
http://www.nopistons.com/forums/inde...post&id=527673
http://www.nopistons.com/forums/inde...post&id=527674

 

this link opened, and i didnt relize it...it scared the **** out of me.

jeff20b: he wanted a engine sound clip, not a starter.. j/k

 

lol, at least it's a 1st gen starter instead of the stuck-pig sound of 2nd gen and later starters. Consider yourself lucky that your ears were spared from the horribleness.

The next time I record that engine, it'll have a 2nd gen starter, but at least it should hold an idle... probably.

 

Jeff... thats the single most orgasm indusing sound i've ever heard....

"you guys got a towel?"

 

ok so its not a bridge port, or a P Port... its a street port, and when that motor got pulled apart, i saw just how sloppy of a street port it was(could have done better with a dull hack saw...), hell its not even a first gen... but this is what my TII sounded like with a "street port" and 3" straight pipe/down pipe.... very sick sounding indeed...

http://premium.uploadit.org/Elysian893/exhaustnote.mp3

the mic was bout 7-8 feet back, and i used a Shure SM57 instrument mic and my boss digital 4 track to record it...

 

Don't forget my SP... it was quite the brapmeister.

http://www.geocities.com/izzmus/images/ and download (do not stream) epdrivecold.mp3.

 

http://www.freewebs.com/rotorshape/sounds.htm
There is 2 sounds of my car
Karis

 

any soundclip will work as long as its a ROTARY.

 

That 20b sounds sick!!!!!!!!

 

*someday* Ill swap a 20b into my 1stgen.

 

Thank you. The sound clips were recorded off of a straight header. I also fabbed a quick carb adaptor to run the 20B off a Racing Beat prepped dellorto 48DHLA. It had a few vacuum leaks and the fuel would pool inside the upper manifold. Not a good combo. I'll be sure to record a few more sound clips after I get it running properly. I started fabbing an exhaust system for it today.

 

What would my car sound like if I cleared out the resonators so i just had straight pipes to a streetport muffler?

Anybody have any soundclips of that?