post pics of 1st gen with aftermarket wheels
#1
Ghost Ride the Whip
Thread Starter
post pics of 1st gen with aftermarket wheels
I'm considering getting aftermarket wheels for my 1st gen but I want to see what some of you are sporting out there on your cars. Something I had my eye on were panasports or watanabes, but I would still like to see what you guys have.
Another question is what is the ideal wheel and tire sizes for a first gen? I was thinking either 15x7 or 14x7
Another question is what is the ideal wheel and tire sizes for a first gen? I was thinking either 15x7 or 14x7
#2
ALLROTOR
iTrader: (2)
I currently have a set of 14 X 7 rims with 205/55 Nitto Drag Radial 555R's all around. They fit the back wheel well real good, probally with room for more tire if necessary, say... real slicks perhaps.
They sit well under the front too.. no major rubbing issues... all quick fixes and I have Racing Beat Springs which dropped the car from stock an inch I think all around.
They sit well under the front too.. no major rubbing issues... all quick fixes and I have Racing Beat Springs which dropped the car from stock an inch I think all around.
#3
Senior Member
Join Date: Jul 2004
Location: Waco Texas
Posts: 254
Likes: 0
Received 0 Likes
on
0 Posts
Here is a pic of my first rx7. It was an 85 gsl-se so it had the common bolt pattern. I put some Konig Viege i believe is what they were called on it. 16x7 with some kuhmo exta supras. Im not sure if the wheels are made anymore. I bought them about 3 or 4 year ago. They looked great and did the car perfectly however i could tell a big weight difference between them and the factory wheels.
Trending Topics
#16
V8 RX-7
iTrader: (2)
Join Date: Sep 2002
Location: BC Canada
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by aws140
is your car lowered? im trying to decide between 16 and 17. i didnt think 17 would fit if the car was lowered
It's lowered with Suspension Techniques springs, tokico illumina 5 way adjustable shocks and has a V8 sitting under the hood
I had 16" Momo wheels, but I regretted going that route and then I got these 17"s
Might as well Go 17" from the start you you will regret it.
#17
No Pistons
Join Date: Sep 2004
Location: Guatemala City
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by CHEF_EG_1
15x8" Centerline IMSA wheels, 205/50-15 Falken Azenis
Thanks for your help...
#19
Say hello to Mr.Wankel
iTrader: (7)
Originally Posted by Phiber Optik
It's lowered with Suspension Techniques springs, tokico illumina 5 way adjustable shocks and has a V8 sitting under the hood
I had 16" Momo wheels, but I regretted going that route and then I got these 17"s
Might as well Go 17" from the start you you will regret it.
I had 16" Momo wheels, but I regretted going that route and then I got these 17"s
Might as well Go 17" from the start you you will regret it.
well i plan on running the FD wheels for a bit, which are 16s, then after that i think ill go with 17s. will the 245s fit in the rear without any modifications?
#20
V8 RX-7
iTrader: (2)
Join Date: Sep 2002
Location: BC Canada
Posts: 567
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by aws140
well i plan on running the FD wheels for a bit, which are 16s, then after that i think ill go with 17s. will the 245s fit in the rear without any modifications?
prolly have to roll the lip, the key is having the right offset
#21
FB+FC=F-ME
Advan RG,17".
Pricey,but light and attractive.Lots of phonies out there for less money,but same look.Would be good for an SE or SE conversion because they have no dish and would tuck well,probably 17X7. I run 8" and 9" because Im widebody....
My old Centerlines,back in the day.15X7,they came from the factory with 110MM and 114.3MM patterns.No special order or anything!Got em' from Les Schwab....
Pricey,but light and attractive.Lots of phonies out there for less money,but same look.Would be good for an SE or SE conversion because they have no dish and would tuck well,probably 17X7. I run 8" and 9" because Im widebody....
My old Centerlines,back in the day.15X7,they came from the factory with 110MM and 114.3MM patterns.No special order or anything!Got em' from Les Schwab....
#22
The Shadetree Project
iTrader: (40)
trysearching there are at least one of these threads a month...
https://www.rx7club.com/showthread.p...ight=pics+rims
https://www.rx7club.com/showthread.p...ight=pics+rims
These are my rims now on my white FB
https://www.rx7club.com/showthread.p...ight=pics+rims
https://www.rx7club.com/showthread.p...ight=pics+rims
These are my rims now on my white FB
#24
No Pistons
Join Date: Sep 2004
Location: Guatemala City
Posts: 151
Likes: 0
Received 0 Likes
on
0 Posts
Rims Size & Brand???
What brand and size of rims are the blue rx7 ones???
I will love to have this rims in my car...
Can you tell me the bolt pattern???
Thanks...
I will love to have this rims in my car...
Can you tell me the bolt pattern???
Thanks...
#25
Ghost Ride the Whip
Thread Starter
No panas? I am running on stockers but selling a set of Centerline wheels 15's with RE71 tires for $200 obo for pick up only if anyone is interested.