post pics of 1st gen with aftermarket wheels
I'm considering getting aftermarket wheels for my 1st gen but I want to see what some of you are sporting out there on your cars. Something I had my eye on were panasports or watanabes, but I would still like to see what you guys have.
Another question is what is the ideal wheel and tire sizes for a first gen? I was thinking either 15x7 or 14x7 |
I currently have a set of 14 X 7 rims with 205/55 Nitto Drag Radial 555R's all around. They fit the back wheel well real good, probally with room for more tire if necessary, say... real slicks perhaps. :)
They sit well under the front too.. no major rubbing issues... all quick fixes and I have Racing Beat Springs which dropped the car from stock an inch I think all around. http://allrotor.com/sitebuilderconte...g.w560h254.jpg |
Here is a pic of my first rx7. It was an 85 gsl-se so it had the common bolt pattern. I put some Konig Viege i believe is what they were called on it. 16x7 with some kuhmo exta supras. Im not sure if the wheels are made anymore. I bought them about 3 or 4 year ago. They looked great and did the car perfectly however i could tell a big weight difference between them and the factory wheels.
http://img.photobucket.com/albums/v4...z/MVC-002F.jpg |
|
2 Attachment(s)
15x7 ARE Mesh wheels with 215/45/15 dunlop tires.
|
1 Attachment(s)
15 X 7 Ronals with 205/50-15 Falkens.
|
VB has panasport lookalikes for $650.
|
http://s87357361.onlinehome.us/pics/...car-clean4.jpg
17x7" BSA Racing Wheels, 40mm offset 205-40-17 yoko avid h4, soon to be 245-40-17 in the rear |
Originally Posted by lovintha7
VB has panasport lookalikes for $650.
|
17x7" BSA Racing Wheels, 40mm offset 205-40-17 yoko avid h4, soon to be 245-40-17 in the rear is your car lowered? im trying to decide between 16 and 17. i didnt think 17 would fit if the car was lowered |
nice car to all.
my rx7 sat in a back yard for 15 years. it looks like it to!! |
the rewinds have a zero offset though i think so they stick out too far.
|
Konig Imagines 17x7 with 205/40/17's :D
http://max7.rx-7.org/images/Max7-SpringPix2.jpg |
Enkei 13x6 Gold Mesh
2 Attachment(s)
These were $200 for the set and $40 for the caps on eBay.
|
http://myspace-041.vo.llnwd.net/0011...11218041_l.jpg
15x8" Centerline IMSA wheels, 205/50-15 Falken Azenis |
Originally Posted by aws140
is your car lowered? im trying to decide between 16 and 17. i didnt think 17 would fit if the car was lowered
It's lowered with Suspension Techniques springs, tokico illumina 5 way adjustable shocks and has a V8 sitting under the hood I had 16" Momo wheels, but I regretted going that route and then I got these 17"s Might as well Go 17" from the start you you will regret it. |
Originally Posted by CHEF_EG_1
http://myspace-041.vo.llnwd.net/0011...11218041_l.jpg
15x8" Centerline IMSA wheels, 205/50-15 Falken Azenis Thanks for your help... |
good luck those rims are so damn rare. I think only 15 sets were made in 4x110
|
Originally Posted by Phiber Optik
It's lowered with Suspension Techniques springs, tokico illumina 5 way adjustable shocks and has a V8 sitting under the hood
I had 16" Momo wheels, but I regretted going that route and then I got these 17"s Might as well Go 17" from the start you you will regret it. well i plan on running the FD wheels for a bit, which are 16s, then after that i think ill go with 17s. will the 245s fit in the rear without any modifications? |
Originally Posted by aws140
well i plan on running the FD wheels for a bit, which are 16s, then after that i think ill go with 17s. will the 245s fit in the rear without any modifications?
prolly have to roll the lip, the key is having the right offset |
Advan RG,17".
Pricey,but light and attractive.Lots of phonies out there for less money,but same look.Would be good for an SE or SE conversion because they have no dish and would tuck well,probably 17X7. I run 8" and 9" because Im widebody.... http://img.photobucket.com/albums/v2...y/DSC01876.jpg http://img.photobucket.com/albums/v2...y/DSC02056.jpg My old Centerlines,back in the day.15X7,they came from the factory with 110MM and 114.3MM patterns.No special order or anything!Got em' from Les Schwab.... http://img.photobucket.com/albums/v2...y/Photo_02.jpg http://img.photobucket.com/albums/v2...y/DSC02483.jpg |
trysearching there are at least one of these threads a month...
https://www.rx7club.com/showthread.p...ight=pics+rims https://www.rx7club.com/showthread.p...ight=pics+rims These are my rims now on my white FB https://www.rx7club.com/attachment.p...d=106523&stc=1 |
|
Rims Size & Brand???
What brand and size of rims are the blue rx7 ones???
I will love to have this rims in my car... Can you tell me the bolt pattern??? Thanks... :bigthumb: http://memimage.cardomain.net/member...9_175_full.jpg |
2 Attachment(s)
No panas? I am running on stockers but selling a set of Centerline wheels 15's with RE71 tires for $200 obo for pick up only if anyone is interested.
|
All times are GMT -5. The time now is 02:19 AM. |
© 2024 MH Sub I, LLC dba Internet Brands