Parts from other cars in a First Gen.
02-04-09, 09:21 PM
#26
Lives on the Forum
1st gen MR2 fans (work great!)
2nd gen alloy water pump housing (the original cast iron weighs a ton and a half)
2nd gen aluminum water pump
Direct fire ignition
Can't think of anything else at the moment...
.
2nd gen alloy water pump housing (the original cast iron weighs a ton and a half)
2nd gen aluminum water pump
Direct fire ignition
Can't think of anything else at the moment...
.
02-05-09, 04:18 PM
#33
NIKOCRX
Join Date: Dec 2005
Location: greece
Posts: 616
Likes: 0
Received 0 Likes
on
0 Posts
ok
-engine--------------------------------->mazda rx7 91'fc s5
-trans----------------------------------->mazda rx7 91' fc s5
-fuse block----------------------------->mazda rx7 fc
-coils------------------------------------>mazda rx7 fc
-msd spark pluss wires-------------->mazda rx7 fc
-engine harness---------------------->mazda rx7 fc s5
-hood scoup--------------------------->mazda rx7 fc
-window master switch-------------->mazda rx7 fc
-apexi ecu------------------------------>mazda rx7 fc
-indiglo gauges------------------------>mazda 85 gslse
-fuel filter-------------------------------->subaru impreza
-fuel pump------------------------------>porsche 911
-short shift------------------------------>mazda miata
-**** **** illuminated----------------->mazda rx8
-seats------------------------------------>mazda rx8
-front brakes and rotors-------------->mazda rx8
-strut bar-------------------------------->mazda rx7 fd
-uper manifold-------------------------->mazda rx7 fd
-alternator------------------------------>mazda rx7 fd
-front bumper lights------------------->mazda rx7 fd 99'spec
-front bumper--------------------------->ford focus
-rear bumper---------------------------->honda s2000(half)+subaru impreza(half)
-side skirts------------------------------->honda s2000
-half rear fenders----------------------->honda s2000
-trank lid---------------------------------->honda s2000
-rear tailights---------------------------->honda s2000
-rear stop light-------------------------->honda s2000
-start button----------------------------->honda s2000
-fuel door--------------------------------->ford f150
-f1 carbon mirrors----------------------->honda nsx
-horn button----------------------------->mazda rx7 fd ''type r''
-emblems and stickers----------------->mazda rx7 fd ''type r''
-front lights------------------------------>nissan 200sx
i'm sure i did forget something...will add it later...
-engine--------------------------------->mazda rx7 91'fc s5
-trans----------------------------------->mazda rx7 91' fc s5
-fuse block----------------------------->mazda rx7 fc
-coils------------------------------------>mazda rx7 fc
-msd spark pluss wires-------------->mazda rx7 fc
-engine harness---------------------->mazda rx7 fc s5
-hood scoup--------------------------->mazda rx7 fc
-window master switch-------------->mazda rx7 fc
-apexi ecu------------------------------>mazda rx7 fc
-indiglo gauges------------------------>mazda 85 gslse
-fuel filter-------------------------------->subaru impreza
-fuel pump------------------------------>porsche 911
-short shift------------------------------>mazda miata
-**** **** illuminated----------------->mazda rx8
-seats------------------------------------>mazda rx8
-front brakes and rotors-------------->mazda rx8
-strut bar-------------------------------->mazda rx7 fd
-uper manifold-------------------------->mazda rx7 fd
-alternator------------------------------>mazda rx7 fd
-front bumper lights------------------->mazda rx7 fd 99'spec
-front bumper--------------------------->ford focus
-rear bumper---------------------------->honda s2000(half)+subaru impreza(half)
-side skirts------------------------------->honda s2000
-half rear fenders----------------------->honda s2000
-trank lid---------------------------------->honda s2000
-rear tailights---------------------------->honda s2000
-rear stop light-------------------------->honda s2000
-start button----------------------------->honda s2000
-fuel door--------------------------------->ford f150
-f1 carbon mirrors----------------------->honda nsx
-horn button----------------------------->mazda rx7 fd ''type r''
-emblems and stickers----------------->mazda rx7 fd ''type r''
-front lights------------------------------>nissan 200sx
i'm sure i did forget something...will add it later...
02-05-09, 05:15 PM
#35
Sounds like it's a Mazdondabaru RX789112000sxs....
Johnny Cash; "One Piece at a Time":
Johnny Cash; "One Piece at a Time":
Well, I left Kentucky back in '49
An' went to Detroit workin' on a 'sembly line
The first year they had me puttin' wheels on cadillacs
Every day I'd watch them beauties roll by
And sometimes I'd hang my head and cry
'Cause I always wanted me one that was long and black.
One day I devised myself a plan
That should be the envy of most any man
I'd sneak it out of there in a lunchbox in my hand
Now gettin' caught meant gettin' fired
But I figured I'd have it all by the time I retired
I'd have me a car worth at least a hundred grand.
[CHORUS]
I'd get it one piece at a time
And it wouldn't cost me a dime
You'll know it's me when I come through your town
I'm gonna ride around in style
I'm gonna drive everybody wild
'Cause I'll have the only one there is around.
So the very next day when I punched in
With my big lunchbox and with help from my friends
I left that day with a lunch box full of gears
Now, I never considered myself a thief
GM wouldn't miss just one little piece
Especially if I strung it out over several years.
The first day I got me a fuel pump
And the next day I got me an engine and a trunk
Then I got me a transmission and all of the chrome
The little things I could get in my big lunchbox
Like nuts, an' bolts, and all four shocks
But the big stuff we snuck out in my buddy's mobile home.
Now, up to now my plan went all right
'Til we tried to put it all together one night
And that's when we noticed that something was definitely wrong.
The transmission was a '53
And the motor turned out to be a '73
And when we tried to put in the bolts all the holes were gone.
So we drilled it out so that it would fit
And with a little bit of help with an A-daptor kit
We had that engine runnin' just like a song
Now the headlights' was another sight
We had two on the left and one on the right
But when we pulled out the switch all three of 'em come on.
The back end looked kinda funny too
But we put it together and when we got thru
Well, that's when we noticed that we only had one tail-fin
About that time my wife walked out
And I could see in her eyes that she had her doubts
But she opened the door and said "Honey, take me for a spin."
So we drove up town just to get the tags
And I headed her right on down main drag
I could hear everybody laughin' for blocks around
But up there at the court house they didn't laugh
'Cause to type it up it took the whole staff
And when they got through the title weighed sixty pounds.
[CHORUS]
I got it one piece at a time
And it didn't cost me a dime
You'll know it's me when I come through your town
I'm gonna ride around in style
I'm gonna drive everybody wild
'Cause I'll have the only one there is around.
[Spoken] Ugh! Yow, RED RYDER
This is the COTTON MOUTH
In the PSYCHO-BILLY CADILLAC Come on
Huh, This is the COTTON MOUTH
And negatory on the cost of this mow-chine there RED RYDER
You might say I went right up to the factory
And picked it up, it's cheaper that way
Ugh!, what model is it?
An' went to Detroit workin' on a 'sembly line
The first year they had me puttin' wheels on cadillacs
Every day I'd watch them beauties roll by
And sometimes I'd hang my head and cry
'Cause I always wanted me one that was long and black.
One day I devised myself a plan
That should be the envy of most any man
I'd sneak it out of there in a lunchbox in my hand
Now gettin' caught meant gettin' fired
But I figured I'd have it all by the time I retired
I'd have me a car worth at least a hundred grand.
[CHORUS]
I'd get it one piece at a time
And it wouldn't cost me a dime
You'll know it's me when I come through your town
I'm gonna ride around in style
I'm gonna drive everybody wild
'Cause I'll have the only one there is around.
So the very next day when I punched in
With my big lunchbox and with help from my friends
I left that day with a lunch box full of gears
Now, I never considered myself a thief
GM wouldn't miss just one little piece
Especially if I strung it out over several years.
The first day I got me a fuel pump
And the next day I got me an engine and a trunk
Then I got me a transmission and all of the chrome
The little things I could get in my big lunchbox
Like nuts, an' bolts, and all four shocks
But the big stuff we snuck out in my buddy's mobile home.
Now, up to now my plan went all right
'Til we tried to put it all together one night
And that's when we noticed that something was definitely wrong.
The transmission was a '53
And the motor turned out to be a '73
And when we tried to put in the bolts all the holes were gone.
So we drilled it out so that it would fit
And with a little bit of help with an A-daptor kit
We had that engine runnin' just like a song
Now the headlights' was another sight
We had two on the left and one on the right
But when we pulled out the switch all three of 'em come on.
The back end looked kinda funny too
But we put it together and when we got thru
Well, that's when we noticed that we only had one tail-fin
About that time my wife walked out
And I could see in her eyes that she had her doubts
But she opened the door and said "Honey, take me for a spin."
So we drove up town just to get the tags
And I headed her right on down main drag
I could hear everybody laughin' for blocks around
But up there at the court house they didn't laugh
'Cause to type it up it took the whole staff
And when they got through the title weighed sixty pounds.
[CHORUS]
I got it one piece at a time
And it didn't cost me a dime
You'll know it's me when I come through your town
I'm gonna ride around in style
I'm gonna drive everybody wild
'Cause I'll have the only one there is around.
[Spoken] Ugh! Yow, RED RYDER
This is the COTTON MOUTH
In the PSYCHO-BILLY CADILLAC Come on
Huh, This is the COTTON MOUTH
And negatory on the cost of this mow-chine there RED RYDER
You might say I went right up to the factory
And picked it up, it's cheaper that way
Ugh!, what model is it?
07-19-09, 10:22 PM
#37
Full Member
Join Date: Sep 2005
Location: Pueblo, Colorado
Posts: 186
Likes: 0
Received 0 Likes
on
0 Posts
Hey-- We really do need a wiki. Some of these swaps are bolt-off, bolt-on, whereas others (taurus fan, points-swap-out and the rear end conversion for example) are not quite so... easy to do.
What are the chances of a hosted wiki?
What are the chances of a hosted wiki?
07-22-09, 08:32 PM
#44
Banned. I got OWNED!!!
iTrader: (7)
Join Date: Dec 2008
Location: Oregon
Posts: 1,326
Likes: 0
Received 0 Likes
on
0 Posts
I'm looking to put in a second gen fuse box in my FB, but I cant find the right size quick disconnects. anyone know what size I need and where do I find them? BTW the whole reason I wanted to do the FC fuse box was because I couldn't find the right size quick disconnects that look to be the same size. I can get fusible link wires all day long for about 5 bucks a foot.
I have a S4 Alt, 2g leading coil, miata short shift, apex'i muffler from my old lancer. I still need to install the FC oil cooler, and fuse box.`
I have a S4 Alt, 2g leading coil, miata short shift, apex'i muffler from my old lancer. I still need to install the FC oil cooler, and fuse box.`
07-22-09, 08:57 PM
#45
Convert your fusible links into a beautiful fuse box. Simply take out the wires/links and install Bussmann fusible link fuses (FLF-20--for the 20 amp). They are nice looking, clear, (so you can see inside), and best of all----they plug right in! No mods, no fuss. Your fusible link block will look awesome with all the different color fuses, like a real fuse panel. Someone on the forum gave me this idea.
Mike
Mike
07-23-09, 12:33 AM
#47
Banned. I got OWNED!!!
iTrader: (7)
Join Date: Dec 2008
Location: Oregon
Posts: 1,326
Likes: 0
Received 0 Likes
on
0 Posts
Convert your fusible links into a beautiful fuse box. Simply A the wires/links and install Bussmann fusible link fuses (FLF-20--for the 20 amp). They are nice looking, clear, (so you can see inside), and best of all----they plug right in! No mods, no fuss. Your fusible link block will look awesome with all the different color fuses, like a real fuse panel. Someone on the forum gave me this idea.
Mike
Mike
That didn't work for me. I've tried it. I wiggled it I got no power. I've already bought the part and made the bracket to mount it. I just need the connectors
07-23-09, 06:02 PM
#50
In my GSL-SE:
S4 13b engine
S4 ECU
S4 gearbox w/ s3 tail shaft
My S4 13B swap write up.
https://www.rx7club.com/1st-generation-specific-1979-1985-18/1984-gsl-se-s4-13b-project-832622/
S4 13b engine
S4 ECU
S4 gearbox w/ s3 tail shaft
My S4 13B swap write up.
https://www.rx7club.com/1st-generation-specific-1979-1985-18/1984-gsl-se-s4-13b-project-832622/