oil pressure gauge
#1
Junior Member
Thread Starter
Join Date: May 2014
Location: fort lauderdale
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
oil pressure gauge
Hey guys, oil pressure gauge in my 85 kinda works. When I start the the car, the gauge moves a little, but never moves passed the 0 on the gauge. I took the senser out of the motor and cleaned it with carb cleaner thinking it might be just stuck with gunk. No change. Any thoughts. Thanks for the help.
#2
Lolicon*** of RX-7 World
Hey guys, oil pressure gauge in my 85 kinda works. When I start the the car, the gauge moves a little, but never moves passed the 0 on the gauge. I took the senser out of the motor and cleaned it with carb cleaner thinking it might be just stuck with gunk. No change. Any thoughts. Thanks for the help.
Just my $.2
#3
Junior Member
Thread Starter
Join Date: May 2014
Location: fort lauderdale
Posts: 33
Likes: 0
Received 0 Likes
on
0 Posts
Thanks. Can I just wire it up to the sensor in the motor (just use the original sensor to an autometer gauge). I'm an amateur mechanic. You said something about vacuum line, what would I hook a vacuum line to? Sorry for the ignorance.
#4
Lolicon*** of RX-7 World
It's a line from the back of the gauge it puts pressure and abit of oil through to measure the pressure from the oil. And I didn't. Take mine apart the first time I had to correct the mistakes on mine but from what I've looked at I didn't have to mess with the sensor. Just rewire it all with the correct wiring.
Thread
Thread Starter
Forum
Replies
Last Post