im going to premix and want to take off my omp. do i need a block off plate for it or can i just take it off

 

Yes you need a block off plate,

 

can i put bolts n the spot of the lines

 

I dont see why not. It would be the same as capping it off.

 

Link for block off plates please.

 

hey alex no luck i tried that before i made the post. do u know which bolts i can use

 

Take the pump off, use it to make a pattern for the block off plate out of 1/8" steel or 3/16" aluminum. Buy a sheet of gasket paper, make a gasket and bolt it on. Not hard to do. Don't forget to cap the nipples on the carb/intake, or you will have a vacuum leak.