BMS2004

ok so my oil filler tube has sut in it. (car sat for 2 years) I know you just pull and twist to get it off.

1. Whats a good way to clean it up?

2. I can't remember do theses things have an o-rign for the tube or just put it back in the plate?

3 is my engine pretty much screwed now? the oil on dipstick is clean and shows no signs of rus on that or any metal.

Thanks for the input.
Ron

Siraniko

iTrader: (13)

whats a sut

IanS

iTrader: (4)

Soot, like dirt. There is dirt in it.

Jeff20B

iTrader: (13)

Just wipe it with a rag and change your oil at normal intervals.

BMS2004

haha sorry guys it was late last night, reading over my post I have no idea why i put "sut"
I meant rust.

Jeff20B

iTrader: (13)

If it's rust, then you'll need to pay attention to your PCV system.

rotaryrudy

iTrader: (2)

take off your exhaust manifold and look in there if you can see rust in there too then you have a problem