Oil cooler swap
04-10-10, 12:49 PM
#1
Junior Member
Thread Starter
Join Date: Mar 2010
Location: bay area
Posts: 13
Likes: 0
Received 0 Likes
on
0 Posts
Oil cooler swap
I found a oil cooler from an fc. I wonder beside all the hose i get from RB. What else i need from fc to do this swap beside oil cooler? Thanks for your help...
04-10-10, 01:08 PM
#2
There is a writeup in the Archive section. You need the oil cooler, the lines and the oil pedestal (and some plugs for unused coolant lines)
Read the writeup for how to cut the old FC rubber off the lines. You don't have to cut the long hardline either, it will fit. A local hydraulic shop can supply the hose and crimp on the lines.
Read the writeup for how to cut the old FC rubber off the lines. You don't have to cut the long hardline either, it will fit. A local hydraulic shop can supply the hose and crimp on the lines.
