no headlights?
#1
Full Member
Thread Starter
Join Date: Feb 2009
Location: Cinci area
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
no headlights?
ok so my headlights don't work now....where should i start to look? i tried searching but most were having problems with the lights retracting and such but mine work fine now, just no headlights. helppp
#6
Lives on the Forum
I think everyone is pulling their cars out of the snowbanks now, and finding that the switched have had all winter to build up corrosion.
However, thinking about this guy's issue, if you have no headlights at all (low beam, high beam, pulling the lever back) then maybe he should check his fuses before anything else (and fusible links?).
However, thinking about this guy's issue, if you have no headlights at all (low beam, high beam, pulling the lever back) then maybe he should check his fuses before anything else (and fusible links?).
Trending Topics
#9
The Planet Smasher
Join Date: Jan 2009
Location: Woodstock, GA
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
while we are on the subject of the combination switch. I have tried spraying mine out with electrical contact cleaner to no avail. I have low beams, momentary high beams, but not permanent high beams. Anybody know of a good place to look for a new switch, these fuggers are EXPENSIVE from mazdatrix.
#11
The Planet Smasher
Join Date: Jan 2009
Location: Woodstock, GA
Posts: 148
Likes: 0
Received 0 Likes
on
0 Posts
man, if you wanna go through the trouble, feel free. im not picky, all Im looking for is working condition. I can repair aesthetics. like i said, mine works for everything except for the switched high beams position. momentary high beams and switched low beams work fine. the wiper side works fine too, but unfortunately my wiper motor is bad.
#12
Full Member
Thread Starter
Join Date: Feb 2009
Location: Cinci area
Posts: 125
Likes: 0
Received 0 Likes
on
0 Posts
well before i took this one out the only thing that didn't work was the headlights, brights,wipers,washer fluid everything else worked i got it cleaned up, i gotta put it in and test it out, maybe tonight, i'll let you know
Thread
Thread Starter
Forum
Replies
Last Post
renjiv2
3rd Generation Specific (1993-2002)
57
01-25-24 03:34 AM
FC3S Timmy
2nd Generation Specific (1986-1992)
16
10-03-15 01:08 AM