New Muffler
#1
The Rotorheaded Geek
Thread Starter
iTrader: (1)
Join Date: Mar 2002
Location: exit 8 in Manchester, NH
Posts: 920
Likes: 0
Received 0 Likes
on
0 Posts
New Muffler
Well dropped her off this morning to get the new muffler put on. It is the AeroTurbine 2540. Will post up some pics and vids when I get her back tonight or tomorrow morning. Hoping for the best, they are re plumbing the car to get a good straight shot into the muffler for the best effect. Before I had just an 18" by like 5" BOMZ can on there, now it will be just the aeroturbine, if it is still a little too noisy I am going to put a RB silencer or something on it. But in reallity as long she is a little quieter I won't have any issue with it since she was putting out around 90db outside the car under load, (100db in the cab) as measured with a radioshack db meter.
#3
The Rotorheaded Geek
Thread Starter
iTrader: (1)
Join Date: Mar 2002
Location: exit 8 in Manchester, NH
Posts: 920
Likes: 0
Received 0 Likes
on
0 Posts
Ok, with just the muffler it is a bit loud. We registered ~96db at 34ft w/ the radioshack meter. Not too bad overall does need an additional silencer, I am opting for a RB pre-silencer. The sound is a bit tinny but still has enough bass so that you can feel it. Will get some sound up by the weekend.
Note: I think they would probably work better if not possitioned after the axle, tho I got a good 6" or so of straight pipe there I think they benefit from having pipe on both ends.
Overall I am not disappointed for it being the only muffler on the car, but not a good way to run it unless you like everyone looking at you.
Note: I think they would probably work better if not possitioned after the axle, tho I got a good 6" or so of straight pipe there I think they benefit from having pipe on both ends.
Overall I am not disappointed for it being the only muffler on the car, but not a good way to run it unless you like everyone looking at you.
#4
Full Member
iTrader: (6)
Join Date: May 2003
Location: Saint Louis, MO
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
remember i told you that it was going to be loud On a turbo car it was loud, so i knew on a rotary it would be even louder.
on my car so much for it being a sleeper, now everyone just thinks the muffler fell off
Bryan
on my car so much for it being a sleeper, now everyone just thinks the muffler fell off
Bryan
Trending Topics
#8
The Rotorheaded Geek
Thread Starter
iTrader: (1)
Join Date: Mar 2002
Location: exit 8 in Manchester, NH
Posts: 920
Likes: 0
Received 0 Likes
on
0 Posts
I got mine half off, but ya, just need to setup a host spot. But I wanted to make note that in my daring drives I have noticed that my mpg has gone up by like 1-2 and throttle responce is a bit better. Still too loud to run solo.
#12
kiwi from downunder..
iTrader: (4)
thats cool do you have the road race or just normal rb header post a video or mp3 im interested for sound
i might try an resinator in my setup cause im poor or if i can pickup a presilencer cheap in a few weeks i want a downpipe look did you buy of the net and where?
thanks
chris
i might try an resinator in my setup cause im poor or if i can pickup a presilencer cheap in a few weeks i want a downpipe look did you buy of the net and where?
thanks
chris
#13
The Rotorheaded Geek
Thread Starter
iTrader: (1)
Join Date: Mar 2002
Location: exit 8 in Manchester, NH
Posts: 920
Likes: 0
Received 0 Likes
on
0 Posts
there is a local shop that sells them, and they had one off another car that came to an unfortinate end. I am running a race header with a 2" collector going into 2.5" piping out the back.
Thread
Thread Starter
Forum
Replies
Last Post
Shainiac
Single Turbo RX-7's
12
07-17-19 02:20 PM