.:Adam GS:.

Where is a good place to buy a rebuilt 12a or rebuilding kit for a 12a?

I have a feeling my engine will go soon (My mom drove my car w/ low Oil)



I needed to buy some Oil (thought I had some b4 i changed) so i drove my mom's car to get some (i drained my oil already)... My mom is addicted to Diet Dr Pepper (anyone else?) and thought a "short drive to 7-11 would be harmless" (in my car)




Well, this could be an excuse to but an FD

damon

Well depending on how far of a drive , it may have overheated. pull your plugs and look at them to see if they are wet or coated with oil, if not you should be ok.

On the other hand, mazdatrix is the most complete rebuild kit you can find (approx 91 dollars plus shipping).
the only other thing you SHOULD need is a front and rear main seal. around 115 totaly plus shipping. Ill be ordering mine next month. They also carry rebuilt engines starting at around 1200 plus shipping.

also check out

www.racingbeat.com
www.atkinsrotary.com
www.ebay.com
www.revolutionrotary.com

peace

DriveFast7

iTrader: (1)

put oil in the motor, run it awhile, then remove the oil filter and open it up, see how much metal is in there.....

be sure to have the oil cooler ultrasonic cleaned before putting rebuild in there.

-bp-

.:Adam GS:.

Thanks
I checked the plugs, they were fine..
it's only about a 1 mile drive round trip to the 7-11, it's just down the street...

I may be wanting to rebuild the engine anyway, rebuild it and get a mild port, something along those lines..
Thanks for the help!

Pedestrian X

a rebuild kit only costs 91 bucks?!?!?

Bass

How do you do this?

REVHED

That's just the gasket set. It doesn't include any of the hard seals, springs or oil control o-rings. To replace these with new parts, as you should, you'd probably be looking at around a grand. Then factor in costs for machining the side housings etc. and it starts to add up pretty quickly.

peejay

See if it smokes after you put oil in it.

I'd be worried about overheating myself. The oil is a rather large fraction of the cooling system.

.:Adam GS:.

Just to be sure, I took it to my mechanic..
There was minor (MINOR) metal shavings in the oil filter, nothing to be worried about.
Just to make sure, i had him check the whole engine out

jeremy

iTrader: (1)

personally, i would kill my mother and bury were in the backyard. i thought it was bad when my mother drove my car with a BADLY slipping clutch. i would definitely have her footing the bill. like the fd idea too.

Keaponlaffen

man, I'd be some mad if my mom took my car out for a drive without asking me first, especially after she saw me working on it already....

Jeff

inittab

Wow, does your mom know what she's done? It's gonna cost her a fortune to fix...... I mean, not only is your ported 13bt blown but those turbos of yours are certianly blown too. I'm sure there are a ton of mods.... errr I mean parts that are also shot too. hehehe


seriously..... sorry to hear about it

mar3

iTrader: (8)

Keaponlaffen ---->>Now that's an avatar!!...right on !~LATERZ! mar3