I read the instructions and I was hoping somebody could clarify how the check valve and the oil dipstick vacuum lines are set up, can somebody clarify, pics are nice also...

 

can nobody help me?

 

You will want to get a T fitting and the long straight all metal PCV from Autozone (sorry I forgot the number). Attach the lower vacuum at the Bottom of the T, and the upper on the right side of the T, then a small bit of the hose and push the non threaded side into that bit. The threaded side should face the carb and finish off with the hose going into the carb hat. I'm running 5/16th hose but have to use clamps on it all.

 

so then how do I hook up the black purge valve?

 

I just capped one and put a section of hose on the other with a small spectre breather filter on it

 

sorry the above is for the tubes coming off of the filler tube

 

so then how do I hook up the black purge valve?

 

After spning a couple of hours of searching I found the answer