I was wondering if anyone can give me information on getting some base tuning advice for the setup on my weber. right now it is set up for a stockport 12a with a wraparound sidedraft manifold. I purchased it used, and the guy I got it from already had it dialed in for stockport setup. So I don't know what all it has in it now, just that it was tuned good for what I was running. However, Im rebuilding my 12a and am planning on doing a mild streetport. So I was wanting to know if anyone out there is running this setup on a streetport 12a and if so, what main and air correction jets, emulsion tubes, chokes etc. they might be using to get me in the ballpark. Im considering buying several different jetting and chock options to play with while using a wideband to tune with, but I would feel better getting some advice some of those of you who have had more experience with this setup. Oh, and by the way it is a made in Spain dcoe45 if that matters. Thanks in advance.


jake*

 

start with what you got. if you are going to be running a wideband it should be straight forward.

 

F11 E-tube
175 Main jets
55 squirter tubes
65F8 Idle jet
300 needle and seat.

What I used a while ago when I tuned one up for a friend.