1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

My New Rx7

Thread Tools
 
Search this Thread
 
Old 02-25-06, 05:30 PM
  #1  
Full Member

Thread Starter
 
Rxcalibur's Avatar
 
Join Date: May 2005
Location: Newport, Rhode Island
Posts: 229
Likes: 0
Received 0 Likes on 0 Posts
My New Rx7

Well it was bound to happen sooner or later now my silver targa Rx7 has a wider older brother. After 6 hours of driving to pick it up it was well worth the drive. Now all it needs is a bath.

1983 GSL widebody (possibly a Pacifica widebody kit), new mazda engine bought and installed by mazda with documentation with 20000 miles, 15" Alba wheels, full racing beat exhaust, etc.

Thank you partsguy74 for going through with the trade and I hope that you can fix up and be happy with my 1991 Explorer that I traded to you for your Rx7.
Attached Thumbnails My New Rx7-pic004-.jpg   My New Rx7-pic000-.jpg   My New Rx7-pic001-.jpg   My New Rx7-pic008.jpg  
Old 02-25-06, 05:39 PM
  #2  
Censored

iTrader: (14)
 
ray green's Avatar
 
Join Date: Jul 2002
Location: Georgia
Posts: 11,368
Received 176 Likes on 137 Posts
Looks interesting. I like that silver one on the left.

Ray
Old 02-25-06, 05:42 PM
  #3  
Full Member

 
d0ntdreamit's Avatar
 
Join Date: Oct 2004
Location: huntsville,ala
Posts: 150
Likes: 0
Received 0 Likes on 0 Posts
how much $$$ ?
Old 02-25-06, 05:46 PM
  #4  
MattG FTW!!!!!

iTrader: (2)
 
MattG's Avatar
 
Join Date: Feb 2005
Location: South Windsor, CT
Posts: 2,733
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Rxcalibur
Thank you partsguy74 for going through with the trade and I hope that you can fix up and be happy with my 1991 Explorer that I traded to you for your Rx7.
He traded an Exploder for it
Old 02-25-06, 06:35 PM
  #5  
Full Member

Thread Starter
 
Rxcalibur's Avatar
 
Join Date: May 2005
Location: Newport, Rhode Island
Posts: 229
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by ray green
Looks interesting. I like that silver one on the left.

Ray
Thanks my silver targa Rx7 will always be my favorite even though the widebody has a targa too.

Couldn't resist anymore, did a nice spit shine for the new widebody before it goes to the detail shop.
Attached Thumbnails My New Rx7-picture-490-.jpg   My New Rx7-picture-492-.jpg  
Old 02-25-06, 06:43 PM
  #6  
Resident Weasel

 
Rotary Weasel's Avatar
 
Join Date: Oct 2005
Location: Reno, NV
Posts: 566
Likes: 0
Received 1 Like on 1 Post
you bastard!!
lmao...sweet collection you have going there
Old 02-25-06, 11:55 PM
  #7  
Full Member

 
alex_the_hipple's Avatar
 
Join Date: Feb 2006
Location: Vancouver, WA
Posts: 122
Likes: 0
Received 0 Likes on 0 Posts
Those are some awful nice vehicles you have there.

Regards,
Alexander Hipple
Old 02-26-06, 10:23 AM
  #8  
Full Member

Thread Starter
 
Rxcalibur's Avatar
 
Join Date: May 2005
Location: Newport, Rhode Island
Posts: 229
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by alex_the_hipple
Those are some awful nice vehicles you have there.

Regards,
Alexander Hipple
Thanks. Here's a new pic of the Rx7s in daylight.
Attached Thumbnails My New Rx7-picture-494-.jpg  
Old 02-26-06, 05:31 PM
  #9  
Full Member

Thread Starter
 
Rxcalibur's Avatar
 
Join Date: May 2005
Location: Newport, Rhode Island
Posts: 229
Likes: 0
Received 0 Likes on 0 Posts
Forgot to ask but can anybody confirm what widebody kit my new Rx7 has? I've already ruled out a Mariah Mode One or SCAA kit. Any ideas cause I'de like too know? Could it be a Pacifica kit?
Old 02-26-06, 05:35 PM
  #10  
strictly business

iTrader: (8)
 
KeloidJonesJr.'s Avatar
 
Join Date: May 2005
Location: chamber of farts
Posts: 6,187
Likes: 0
Received 0 Likes on 0 Posts
Good lookin' boat.
Old 02-26-06, 07:28 PM
  #11  
chosen 1

 
Jose Feliciano's Avatar
 
Join Date: Apr 2004
Location: New Jersey
Posts: 1,726
Likes: 0
Received 0 Likes on 0 Posts
I wish I could have run into a trade like that..
Old 02-27-06, 10:40 AM
  #12  
Rotary Enthusiast

 
pillage6's Avatar
 
Join Date: Nov 2002
Location: Jax, FL
Posts: 1,060
Likes: 0
Received 0 Likes on 0 Posts
Man that is a clean car, I have been looking harder and harder at body kits and that one is very nice.
Old 02-27-06, 06:47 PM
  #13  
Full Member

Thread Starter
 
Rxcalibur's Avatar
 
Join Date: May 2005
Location: Newport, Rhode Island
Posts: 229
Likes: 0
Received 0 Likes on 0 Posts
Today my new widebody Rx7 went in for inspection. It passed emissions getting a 1.2 out of a 2.45 limit for smog. However mazda gave me some BS about how some parts of the floor boards have began to rust ( I think its road salt and dirt stuck underneath the car from its 600 mile trip on Saturday through the snow) and that there was a hole in passenger's side rear wheel well. So it passed emissions but failed the safety portion of the inspection. Hopefully I can find a place that will just run the emissions, though it is good know that there are areas in need of repair that are still repairable. I have 30 days to fix the problems. I'm going to take some pictures of the rusted areas (luckily the bins are not rusted) and I'll post them.
Old 02-27-06, 09:17 PM
  #14  
Wankle Waffles

iTrader: (1)
 
Tranquil's Avatar
 
Join Date: Mar 2005
Location: un. k
Posts: 1,740
Likes: 0
Received 1 Like on 1 Post
Thats a great family you got there. I'm quite envious

You should be able to just weld up the spots and be good to go. Just a simple weekend.
Old 02-27-06, 10:34 PM
  #15  
Full Member

Thread Starter
 
Rxcalibur's Avatar
 
Join Date: May 2005
Location: Newport, Rhode Island
Posts: 229
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by Tranquil
Thats a great family you got there. I'm quite envious

You should be able to just weld up the spots and be good to go. Just a simple weekend.

Thanks.....All I need now is GSL-SE, a 79' SA, and the longshot Jspec 12AT GTX and then my collection will be complete. Maybe one FD too..............................
Old 02-27-06, 11:00 PM
  #16  
Mmmm Wankel Juice

 
partsguy74's Avatar
 
Join Date: May 2004
Location: Erie, PA
Posts: 444
Likes: 0
Received 0 Likes on 0 Posts
Good luck with the 7, Rxcalibur. I hope you enjoy it. And thanks for helping out with the issues on the Explorer.

To all rx7club members who have helped me with that buildup over the last year and a half. It was fun, but I needed a 4wd vehicle and I've satisfied my fascination with the wankel, for now. I may return and I'll always be lurking..

And to all a good night.

Dave
Old 02-28-06, 04:52 PM
  #17  
Full Member

Thread Starter
 
Rxcalibur's Avatar
 
Join Date: May 2005
Location: Newport, Rhode Island
Posts: 229
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by partsguy74
Good luck with the 7, Rxcalibur. I hope you enjoy it. And thanks for helping out with the issues on the Explorer.

To all rx7club members who have helped me with that buildup over the last year and a half. It was fun, but I needed a 4wd vehicle and I've satisfied my fascination with the wankel, for now. I may return and I'll always be lurking..

And to all a good night.

Dave
Thank you again partsguy74. Your old widebody Rx7 just had new fuel lines installed and all the undercarriage rust is gone and the new undercoat has been sprayed. Now it will definately pass inspection.

Thanks to every else for their compliments. Next for this Rx7 is better rims (not that I don't like the ones that it has) and maybe a spoiler or a wing. Eventually this white Rx7 will be a silver one. I'll keep everyone posted with pics of my progress.

-Dave
Old 03-02-06, 07:28 PM
  #18  
kiwi from downunder..

iTrader: (4)
 
blwfly's Avatar
 
Join Date: Nov 2005
Location: springfield,oregon
Posts: 3,423
Received 5 Likes on 5 Posts
so no one knows what the bodykit is??
how can you make the wheels flush with the kit spacers or somthin

nice car
a++++
Old 03-02-06, 07:35 PM
  #19  
Full Member

Thread Starter
 
Rxcalibur's Avatar
 
Join Date: May 2005
Location: Newport, Rhode Island
Posts: 229
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by blwfly
so no one knows what the bodykit is??
how can you make the wheels flush with the kit spacers or somthin

nice car
a++++
Yeah man what kit does my widebody have? Does anyone know? Looks like the Pacifica kit. I've explored using spacers on the wheels, but would rather like to put the money into some nice black mesh chrome lip wheels and then put the alba wheels on my silver targa Rx7.
Old 03-02-06, 09:43 PM
  #20  
Full Member

Thread Starter
 
Rxcalibur's Avatar
 
Join Date: May 2005
Location: Newport, Rhode Island
Posts: 229
Likes: 0
Received 0 Likes on 0 Posts
Thank you forum member, perfect circle, with your help and resources I have been able to confirm that my white 1983 widebody Rx7 is in fact a Pacifica widebody. Thank you for your help.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Th0m4s
Build Threads
25
02-26-19 02:04 AM



Quick Reply: My New Rx7



All times are GMT -5. The time now is 07:12 PM.