My current engine bay pics
04-25-04, 08:04 PM
#26
TT 1st gen ? We'll see !
Join Date: Jan 2003
Location: Ottawa, Canada
Posts: 328
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by V8kilr
Sure and its actully 2 layers of paint, both ultra high temp, the gloss coat is not the stuff u get at your local auto parts store.
As you can see from the pictures there is not a radiator fan, with in the increase in tempature from the weather I was able to get the temp gauge 3/4 way to red hot.
I was trying to get all the left over mmo and sea foam out of my engine and exhaust system.
In the process the engine got pretty damn hot, I also got a bunch of mmo and sea foam on the engine.
Oh yes did I mention this was all before the pictures where taken ?
yeah no chipping, bubbling, cracking, etc...
I see people paint their rotarys all the time with NON high temp engine paint.
In fact most rebuilds are painted, what do you think atkins dies one rotor black and the other silver ?
and from what I know they DONT make high temp silver paint.
Sure and its actully 2 layers of paint, both ultra high temp, the gloss coat is not the stuff u get at your local auto parts store.
As you can see from the pictures there is not a radiator fan, with in the increase in tempature from the weather I was able to get the temp gauge 3/4 way to red hot.
I was trying to get all the left over mmo and sea foam out of my engine and exhaust system.
In the process the engine got pretty damn hot, I also got a bunch of mmo and sea foam on the engine.
Oh yes did I mention this was all before the pictures where taken ?
yeah no chipping, bubbling, cracking, etc...
I see people paint their rotarys all the time with NON high temp engine paint.
In fact most rebuilds are painted, what do you think atkins dies one rotor black and the other silver ?
and from what I know they DONT make high temp silver paint.
04-25-04, 08:54 PM
#27
Full Member
Join Date: Aug 2003
Location: Los Angeles
Posts: 67
Likes: 0
Received 0 Likes
on
0 Posts
u guys, if u gonna paint ur engine, make sure its hella clean. no grease, oil etc. lazy man works double. if the base isnt clean, the paint will eventually start chipping off. ull have to then sand down the original paint and start all over....
04-28-04, 12:16 PM
#29
Rotary Freak
Thread Starter
here is the updated DAY 3 pictures
still got alot to do though.
https://www.rx7club.com/showthread.p...hreadid=300193
still got alot to do though.
https://www.rx7club.com/showthread.p...hreadid=300193
Last edited by V8kilr; 04-28-04 at 12:21 PM.
04-28-04, 12:18 PM
#30
Rotary Freak
Thread Starter
here is the updated DAY 3 pictures
still got alot to do though.
https://www.rx7club.com/showthread.p...65#post2969865
still got alot to do though.
https://www.rx7club.com/showthread.p...65#post2969865
Thread
Thread Starter
Forum
Replies
Last Post
immanuel__7
2nd Generation Specific (1986-1992)
89
09-05-15 10:23 AM
