MSD 6AL-2 Installation on a 12-A
#1
Rotor addicted
Thread Starter
Join Date: Apr 2006
Location: HONDURAS
Posts: 75
Likes: 0
Received 0 Likes
on
0 Posts
MSD 6AL-2 Installation on a 12-A
I need to know if anyone has done the MSD 6AL-2 ignition installation on a 1985 12-A with electronic distributor and hopefully wanted to share pictures or a diagram for the wiring of this system on this type of engine.
thanks!
thanks!
#2
i have one too but havnt put it on. just being lazy with wiring and finding a place for the box. go to Mazspeed's First Generation Rx-7 Club Page theres pics and instructions
#3
Junior Member
iTrader: (1)
Join Date: Sep 2012
Location: saskatoon
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
check out scott bakers sand rail page, he has a really good write up on whats required to make it work.
MSD 6A direct fire Ignition for Mazda RX-7 Rotary Engine - Dr. Scott M. Baker
MSD 6A direct fire Ignition for Mazda RX-7 Rotary Engine - Dr. Scott M. Baker
#4
This is what MSD sent me, I don't use a trailing MSD.
This is what MSD sent me, I don't use a trailing MSD. Been working fine for 6 months. MSD6.
If you call them, they have excellent customer service and will send you the exact diagram you need.
Here's the guy I got my info from, second image.
If you call them, they have excellent customer service and will send you the exact diagram you need.
Here's the guy I got my info from, second image.
#6
Senior Member
I followed scott bakers writeup also to the T, and havent had a problem in 3 yrs since I installed it. Juantii pm me and I can send you pics of my install on how I installed 4 coils, 2 for the msd box and 2 for factory wiring in case msd box fails, so you dont get left stranded on the side of the road.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
24seven_dada
3rd Generation Specific (1993-2002)
20
11-10-18 12:03 PM
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
[For Sale] Scratch & Dent, Used, and Open-Box Sale!
SakeBomb Garage
Vendor Classifieds
5
08-09-18 05:54 PM