ok I got the plugs out and have cleaned them I also removed the fuel pump fuse and blew the motor clear of any gas... now the guy said 20-50 oil on the rotor faces how to I apply this?? through the spark plug holes??? and if so how much?

 

Yes, you can put it through the holes or you can pour a little down the primary barrels of your carb. Primarys are the smaller openings of the 4 when looking into your carb. Don't put the oil into the secondary barrels (larger 2 of the 4 in your carb) It shouldn't take much maybe a couple of ounces. Re-install the plugs, wires, insert fuel pump fuse, and start it. I have noticed that if I pump the accel. quickly while cranking the engine it helps to get one started after it has been flooded.