Dear friends.
I am after NEW rear brake rotors from the 1984/85 FB.These must be the vented rotors type with 4x114,3 pcd.I cant find them here in Holland.Anyone knows where to order them on the internet,brand ,code etccc. I hope someone can help me out.

Thanks,Maury.

 

All first gen's came with solid rear rotors AFAIK.

 

www.rockauto.com only shows the solid version. Maybe the euro spec was
vented for the rears? I'm assuming its a GSL-SE since its 114 wheel.

 

the GSL-SE was the only FB that had venter rear rotors.

 

The European model range was completely different to the US model range.
The GSL-SE was a US model only and was the only 1st gen offered with a 13B engine.

In the UK, there were only 3 variants, all with the 12A engine, known as the series 1 ( 1979 - 1980 )
series 2 ( 1981- 1983 )
series 3 ( 1984 - 1985 ).
The series 3 had vented discs all round and the same wheels as the GSL-SE.
Try RX Motors for discs, they're on the net

 

I have e-mailed everyone and everywhere.Mazda in The Netherlands told that iff i got the mazda parts number for these rear vented discs they can order them for me.

I have seen a web page from Spriso datsuns.They have adapted a rear end from a LSD GSL-SE to fit under a datsun fair lady.They also used vented mazda rx-7 discs.So i presume they can be ordered for the 4x114,3 rear wheels.

Any help is welcome as i need them bad and new.

Regards,Maury.

 

FA66-26-251 is the GSL-SE number, which should be the same as the s3 euro, or 12AT....

 

If you need the vented rear discs (on Aus & Euro spec '84-'85 cars) I can get them easily in Australia and willing to post

 

I am still after these new or A link on where to order these ?? Anyone with the factory mazda parts number for the s1 and S2 and S3 rear brake discs ??

 

the 12A 4x110 non vented rotor is part number FA18-26-251

the 13B 4x114.3 vented rotor is part number FA66-26-251