rotopower74

iTrader: (4)

I was just thinking about the pass...early 80's and do some of you remember the lighted rx7 center cover in between the tail lights!!!!?? if someone remember of one or got pix of it...post it.....and if you can find me one lmk.

PK_12A

iTrader: (3)

^I have seen them pop up on ebay of and on but, they aren't lit up. Just check ebay.

DreamInRotary

iTrader: (49)

There was just one up for sale on the forum here for $150 or so, but it wasn't lit up. I'm sure it wouldn't be too bad to light up yourself though - some 194a bulbs would work just fine behind the plate.

Jhereg

iTrader: (27)

They do not light up, but at least one forum member did his with an el panel. I've got one on my se, not lit up though. They are reflective.

jim_chung

iTrader: (2)

I'm the one who lit up the rear center panel with some EL sheeting. Here's the original thread:


https://www.rx7club.com/1st-gen-non-...nished-879556/





regards,


Jim

rotopower74

iTrader: (4)

nice man!!! good work!!! But I did see it light up on the 80's in puerto rico.....maybe not factory made...but it was made...

jim_chung

iTrader: (2)

You're right, the one's made for the SA did come with a series of bulbs!

Dave.Martin2008

I am working on a light up one making it out of plexi glass and painted the inside of it with RX7 stencils. also making a defused LED light board for behind it so it will light up with the tail lights and not the brake lights.

rotopower74

iTrader: (4)

yes!!!!! T/you....if you find one...lmk

rotopower74

iTrader: (4)

get some pix!!!