1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

keep her running

Thread Tools
 
Search this Thread
 
Old Aug 11, 2004 | 12:58 AM
  #1  
Fromslowtogo's Avatar
Thread Starter
rotary newbie
Tenured Member: 20 Years
 
Joined: Aug 2004
Posts: 232
Likes: 0
From: kingston Ontario
Exclamation keep her running

my 83 12a was ran out of gas and now it runs like shiat like just barely running i already changed the filter.. and there is also a leak in the tank so i was wondering if it has a pressure system inside the tank that would cause this? i also read something about a check valve in one of the lines near the carb i dont see this on mine it also looks as if someone put new lines in maybe they didn't put the valve back im not sure any ideas? ...any help to the rotary noob would be great. thanx guys


ps. it runs ok when you keep the revs high like 4 grand high lol

MAtt
Reply
Old Aug 11, 2004 | 01:01 AM
  #2  
FB II's Avatar
Banned. I got OWNED!!!
 
Joined: Dec 2002
Posts: 4,192
Likes: 0
From: wishing i was back in FL
hmmm, i bet you got a line clogged up. could be in the fuel lines, or in the carb itself. i'll chime in again later on what to check. god i'm tired. hahahaha
Reply
Old Aug 11, 2004 | 11:44 AM
  #3  
Fromslowtogo's Avatar
Thread Starter
rotary newbie
Tenured Member: 20 Years
 
Joined: Aug 2004
Posts: 232
Likes: 0
From: kingston Ontario
no one can help eh?
Reply
Old Aug 11, 2004 | 12:35 PM
  #4  
Rx7carl's Avatar
Airflow is my life
Tenured Member 10 Years
 
Joined: Aug 2002
Posts: 6,736
Likes: 2
From: Orlando, Fl
The tank leak shouldnt affect it. If it runs above 4k, then it doesnt sound fuel starved. Sounds like a vacuum leak. Especially if its idleing rough.
Reply
Old Aug 11, 2004 | 02:34 PM
  #5  
Fromslowtogo's Avatar
Thread Starter
rotary newbie
Tenured Member: 20 Years
 
Joined: Aug 2004
Posts: 232
Likes: 0
From: kingston Ontario
lol great where do i start
Reply
Old Aug 11, 2004 | 02:48 PM
  #6  
nipper's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Dec 2002
Posts: 201
Likes: 0
From: Gateway of the North[North Bay]
you have most likely got dirt from the bottom of the gas tank into your fuel line& maybe carburetor. Try unhooking the gas line at the carb and blowing some compressed air through the line [towards the back of the car]. If that doesn't do the trick run a little bit of carburetor cleaner into the carburetor by unhooking the gas line again, squirting some into the line, reconnecting it afterwards. Turn on the key for about 30 seconds to get the carb cleaner into the carb then turn the key off and let it sit 4 hours.Next turn on the key and start the car.This worked 4 me a few times.
Reply
Old Aug 12, 2004 | 11:34 PM
  #7  
Fromslowtogo's Avatar
Thread Starter
rotary newbie
Tenured Member: 20 Years
 
Joined: Aug 2004
Posts: 232
Likes: 0
From: kingston Ontario
ill try that anyt other things to check in case these fall threw?
Reply
Old Aug 13, 2004 | 07:12 AM
  #8  
Rx7carl's Avatar
Airflow is my life
Tenured Member 10 Years
 
Joined: Aug 2002
Posts: 6,736
Likes: 2
From: Orlando, Fl
Originally Posted by Fromslowtogo
lol great where do i start

By looking in the FAQ thread. Look for Peles "end to all no start questions" thread. Also vacuum leak threads will help you as well.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
C. Ludwig
Single Turbo RX-7's
49
Jan 30, 2019 06:31 AM
Rotospectre
New Member RX-7 Technical
3
Mar 28, 2018 03:33 PM
turbo-minivan
General Rotary Tech Support
69
Feb 4, 2016 12:29 AM
The Shaolin
2nd Generation Specific (1986-1992)
9
Sep 14, 2015 07:50 PM




All times are GMT -5. The time now is 09:23 PM.