gonzz

What do you guy think of this? Going to do the same conversion on my 80 RHD.

timmya2

niceee,,,

but this isnt yurs huh?

coz ive seen this pic before

kotkovetz

he never said it was his...

Anyways, What year did that cluster come from? Is that a second gen? I have a 1980 and want to change out my cluster or get something custom made, any info about that picture would be great. Thanks

MarkPerez

that is different,, if it works.

faye x7

How the hell did the guy get that cluster in there?

81Rex6port13b

what is it from?

gonzz

I think it's from a 89-91 2nd Gen. I got a 89-91 cluster last night and will try it this weekend. If you look close at the tach I believe I see 8-1000 rpm increments which has to be a 89-91 cluster. 88 and below I believe went to 7K redline. I will let everyone know how it goes. Once I get it in wiring is the easy part..

Rutnick

come on dude...cough up the details. I have a 1980 too and I would like to know what you have going on there.

Suparslinc

FYI it's illegal to swap instrument clusters. odometer tampering and all that.

Rutnick

not in my state it isn't. You just have to document the change and the mileage.

gonzz

My title has odometer exept so what can happen? If you have a car that is 24 yrs old you think they care?

Suparslinc

No. I didn't mean you were trying to pull a fast one.

gonzz

That's cool. all I said is my car is odometer exempt. So it shouldn't matter. It's the same as swapping out a cluster when yours goes bad.. what can they do?

81Rex6port13b

i dotn see how a second gen 7 cluster would work. there a bit different in shape, and the plugs in the back are different.

so maybe is all custom. you can dismatle the cluster. and peice it back together on a 1st gen empty cluster maybe?

i have no idea. but it looks good. how ever that was done.

81Rex6port13b

and another question is where did he get those pillar pods?

i have not ben able to find them. the only way i know is a CRX pods and heat gun it.

gonzz

Well I got bored and tried it tonight. Can't believe how easy it was. Here is a peek.. Will finish project and wiring this weekend. Also going to get indiglo...

theweasel

I'm looking forward to the finished product.

d0 Luck

has anyone tried this FC gauge cluster on an 84-85 GSL or GSL-SE FB before?? if so, please post relative and informative information about it... i too am contemplating on doing the same thing... hah!
thanks

-Ray-

alien_rx7

Not illegal in my state either. As long as you get it documented. Also, if you have a cluster that the odometer is removable, you can swap it with the original so that you still have the original miles. That's what I did with my other car when I swapped in a cluster with a tach (original cluster had no tach).

Rutnick

You have a 1980? Will you do a writeup on how you wired it and everything after you finish?

gonzz

Ok, No Prob

purple82

I'd like to just switch out the tach. Do you think that's possible?

rotary emotions

The speedo in my car is of an FC (86 NA) and works as good or bad as the old one. I reset the odometer to the same settings as the original, and that'd make it legal.
The NA FC speedo also has the same inputdrive speed as the 81-83 1st gen. So there's no problem there: it still works the same way. It wasnt an easy fit though, and I suppose a cluster-swap might be easier, but then you would have to work on the wiring.

Directfreak

iTrader: (2)

I like it. Definately a great improvment over the stock 79-83 Dash's. Keep in mind guys, that you lose the warning light cluster.

kuhlrx7

WOW that is incredible guys!! I love what was done to that.


but wait a minute thats my car in the pic. I should say that. there is quite a bit of work into doing this and its more than shoving it in to place and changing the wires in the plugs. alex is right do not forget the warning lights have their own cluster in the fc's. I mated parts from an sa cluster to a 91 cluster to make it work and plastic welded them together. Its a real tight fit. the pods are the ones for an 86-88 rx7