Install question about accel pump and shutter valve
#1
Junior Member
Thread Starter
Join Date: Jan 2003
Location: NE
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
nic gibilisco
acc pump leaking, tips on install .Also have new shutter \valve any hints on install these items. Car has 69000 orig,miles runs and idles great, jsut a stumble off first. Am I on the right track thanks for your input
#2
---------------------
Join Date: Nov 2001
Location: Kamloops BC Canada
Posts: 2,029
Likes: 0
Received 0 Likes
on
0 Posts
What was that all about?
Maybe a little more detail, some punctuation, and some proper english might help a bit, and perhaps a real description on the problem, and what you think is the problem, and what you've done....
Do you need tips on the accelerator pump install, as well as the shutter valve? I assume that's what you meant... and it has a stumble when you start out....
could be idle mixture too?
Jeff
#3
brilliantly stupid
Join Date: Nov 2002
Location: Rockford, IL
Posts: 1,100
Likes: 0
Received 0 Likes
on
0 Posts
Re: nic gibilisco
Originally posted by Nick Gibilisco
acc pump leaking, tips on install .Also have new shutter \valve any hints on install these items. Car has 69000 orig,miles runs and idles great, jsut a stumble off first. Am I on the right track thanks for your input
acc pump leaking, tips on install .Also have new shutter \valve any hints on install these items. Car has 69000 orig,miles runs and idles great, jsut a stumble off first. Am I on the right track thanks for your input
#7
I can has a Hemi? Yes...
iTrader: (2)
Re: acc pump etc
Originally posted by Nick Gibilisco
acc pump leaking, tips on install .Also have new shutter \valve any hints on install these items. Car has 69000 orig,miles runs and idles great, jsut a stumble off first. Am I on the right track thanks for your input
acc pump leaking, tips on install .Also have new shutter \valve any hints on install these items. Car has 69000 orig,miles runs and idles great, jsut a stumble off first. Am I on the right track thanks for your input
Originally posted by Nick Gibilisco
thanks for all your and wisdom ky or whast ever
thanks for all your and wisdom ky or whast ever
Trending Topics
#8
Junior Member
Thread Starter
Join Date: Jan 2003
Location: NE
Posts: 26
Likes: 0
Received 0 Likes
on
0 Posts
advise
The post was pretty simple to me, any advise on putting these two items in, Ah thats the problem it must have been too simple for you to fighure it out, Thanks anyway
#10
My wife bought me 2 RX-7s
Join Date: Aug 2001
Location: Saskatoon, Saskatchewan, Canada
Posts: 2,328
Likes: 0
Received 2 Likes
on
2 Posts
You're going to learn that the general populace on this forum will put up with quite a bit, but bad grammar and poor explanations are not on that list. If you want help, explain yourself better, and show some respect. Alot of the guys on this forum know more about rotary engines than you and I ever will.
It's not much to ask, is it?
As for your problem, the accelerator pump is the most likely culprit for the stumble off idle. Changing that should help somewhat, but you may find that rebuilding the entire carb is in order. That's what it took with my '82 anyhow. Good luck with the carb, and take the suggestions concerning your postings to heart.
Welcome to the forum.
Matt
1979 SA22C
It's not much to ask, is it?
As for your problem, the accelerator pump is the most likely culprit for the stumble off idle. Changing that should help somewhat, but you may find that rebuilding the entire carb is in order. That's what it took with my '82 anyhow. Good luck with the carb, and take the suggestions concerning your postings to heart.
Welcome to the forum.
Matt
1979 SA22C
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM