1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

How to install 12a Car tech turbo?

Thread Tools
 
Search this Thread
 
Old Apr 20, 2004 | 09:59 PM
  #1  
Dream On's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Apr 2004
Posts: 48
Likes: 0
From: Ohio
How to install 12a Car tech turbo?

Hey guys, I'm trying to help out my dad here. I've searched this site, but I think i need something more in depth to get this thing installed. My dad has an 82 rx7, 12a, gsl or whatever the highest model is i believe, and bought a car tech turbo about a year ago, and still has done nothing with it to get it installed. He says he has the intake manifold, but not the exhaust. He said it took it to a muffler shop and they said that they didn't have a flange for it so they couldn't really help much. I really want him to get this thing on b/c he is thinking of selling the car cause it seems that nobody can figure out how to get the thing bolted up and working. The car is stock besides maybe a header he said. What all would the car need to get the turbo on and working? He says that the turbo is designed to bolt to a holly carb. if that helps any..He also has a turbo from a 2g turbo II as well as the top mount intercooler. Which would be easier/better? If anybody has any pictures of a similar set up, that would help a lot also. Thanks for any help or suggestions in advance.
Reply
Old Apr 20, 2004 | 10:13 PM
  #2  
rototiller1's Avatar
Inspector, Falcon Jet
Tenured Member 05 Years
 
Joined: Mar 2003
Posts: 430
Likes: 0
From: Little Rock
sell the turbo setup?
Reply
Old Apr 20, 2004 | 10:19 PM
  #3  
Senior Member
Tenured Member 05 Years
 
Joined: Oct 2003
Posts: 320
Likes: 0
From: warner robins, Georgia
well if he doesnt have the exhaust manifold...wut excatly of the purpose of the "kit" he should have a exhaust manifold tha bolts on to block...then the turbo to that...then tubing to carb...and any carb preped for boost will work just might need a different carb hat. and hes gona have to tap the front cover for the turbo oil return...and tap into a pressurized oil source to go to the turbo. then gettin back to the exhaust...u may have to get a machine shop to make a downpipe...THEN take it to exhaust shop. seems like a lot of work but isnt that bad. that is if he has the exhaust manifold
Reply
Old Apr 21, 2004 | 10:39 AM
  #4  
Dream On's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Apr 2004
Posts: 48
Likes: 0
From: Ohio
Would there be anywhere online to find that manifold? Or should he just keep going to different exhaust shops to see if one of them can make it? Thanks.
Reply
Old Apr 22, 2004 | 01:30 AM
  #5  
Dream On's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Apr 2004
Posts: 48
Likes: 0
From: Ohio
Where would you tap an oil line from? Thanks.
Reply
Old Apr 22, 2004 | 01:33 AM
  #6  
Directfreak's Avatar
I am a Jeeper Now.
Tenured Member 20 Years
iTrader: (2)
 
Joined: Dec 2001
Posts: 9,371
Likes: 4
From: 3OH5
post pics of what you have, and we'll fill in the blanks.
Reply
Old Apr 22, 2004 | 01:54 PM
  #7  
Dream On's Avatar
Thread Starter
Junior Member
Tenured Member 05 Years
 
Joined: Apr 2004
Posts: 48
Likes: 0
From: Ohio
When i go home this weekend I'll try and get some pics taken of everything that I can. I really don't want him to sell his car. Should probably be up on saturday or sunday if i get a chance. Thanks.
Reply
Old Mar 10, 2006 | 03:15 PM
  #8  
drifted's Avatar
Full Member
Tenured Member 05 Years
 
Joined: Dec 2005
Posts: 108
Likes: 0
From: nyc
yeah once again turbo

.hmmm..just testing if i'm here
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
BNR34RB26DETT
Build Threads
42
Feb 28, 2018 11:27 AM
rx7brandon
General Rotary Tech Support
3
Aug 16, 2015 10:55 AM
gabescanlon
Interior / Exterior / Audio
1
Aug 11, 2015 05:59 PM




All times are GMT -5. The time now is 06:06 PM.