I need to replace all the rock hard / shattered vacuum hoses on my GSL-SE. Anyone know the correct sizes and lengths that I will need to do the job right?

Thanks,

Rhett

 

The little vacuum lines for the solenoids are 3.5mm. your local parts store won't carry it but you can find the closest standard one and it should be fine. As far as lengths go, just cut to fit, make sure you cut them a little longer than original to allow for the bends and "U" shapes.
*OR* you can buy silicone 3.5mm hoses from Mazdatrix for $2/foot if you have a little extra cash.