hood air extractor
#1
Senior Member
Thread Starter
Join Date: Apr 2003
Location: Winnipeg MB
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
hood air extractor
hey...I have read about the Porsche GT2 and the mitsubishi EVO VIII having ducts that extract air from the area directly behind the rad, and direct it over the hood to increase the down force and decrease the C.O.D. My question is...is this possible with a rotary? how much does the engine depend on the air moving over the rotor housing for cooling? would the engine over heat if there wasnt that constant air moving over it (i suspose thats part of teh reason for the huge cooling fan and not a plain electric unit)
#4
Senior Member
Thread Starter
Join Date: Apr 2003
Location: Winnipeg MB
Posts: 601
Likes: 0
Received 0 Likes
on
0 Posts
you could build one with a piece of sheet metal before the engine, a slot in the hood and a lip at the front of that slot to create a vacume...I am just concerned about it causing cooling issues...
Trending Topics
#8
Administrator
iTrader: (8)
Join Date: Nov 1998
Location: So. Arlington, TX!!!
Posts: 12,974
Likes: 0
Received 59 Likes
on
36 Posts
Water exhibits a physical characteristic of flow known as capillary flow. In other words, it will follow the surface under the hole and drip on your alternator or dizzy at the most inopportune moment following any one of Murphy's Laws....
#11
I plan on doing a one off unit for mine out of CF with a Shroud or duct coming off the bottom of the rad with an electric fan and an intercooler mounted up top... the v style mount that the third gens use...
#12
Airflow is my life
Originally posted by Directfreak
Nice. post more pics and info.
Nice. post more pics and info.
SOmeone else here has one too! moremazda
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM