help finding a lsd for 85
Thread Starter
****ty Tune= Low #'s
Joined: Apr 2004
Posts: 1,496
Likes: 0
From: Charleston, SC (chucktown!)
help finding a lsd for 85
basclly im tryin to find a site that sells a lsd i want to only swap the pumpkin or whatever not the whole thing if that makes a difference on price and shipping since the rear will need to be shipped by truck and the pumpkin wont
well, a while back Hades12 had a SE diff that I was going to buy from him, cause I was having such a hard time finding a whole rear end (I really want disks in the back) anyway, I found a GSL rear so I didn't buy his SE diff, maybe he still has it.
The SE diff is earmarked for FBII, Hoping to get toghther with him this weekend or over thanksgiving to Deliver it. I do have an 85 GSL LSD that I pulled a few months ago. I was kind of keeping it layed back to use on one of my cars. I would sell it but I would ask more than it is Worth.
82, thanks for thinking of me.
82, thanks for thinking of me.
Thread Starter
****ty Tune= Low #'s
Joined: Apr 2004
Posts: 1,496
Likes: 0
From: Charleston, SC (chucktown!)
i found this place that sells a conversion kit lsd for the stock non lsd cars....???how does this work http://www.eraceparts.com/item.jhtml...8&PRID=1468793
Trending Topics
Hey I would like to know the quality of the LSD and how good the website is that Rusty posted a link for. I would like an LSD rear end but I don't like junk yards and shipping and cost of a used one would cost about the same so $250 does not sound too bad to me I just want to know the quality of it thanks again for your help.
You bastard I will chase you down and take it from you if my open diff can keep up with your LSD diff that is. I was really just wanting to know the quality of the LSD unit at the site how long it will last if it is a good brand that kind of stuff I know how to install it and I know how they work.
Looks to me like all it comes with is a spring kit, a torsion bar, two snap rings, and those two blocks of material.
and if you are doing hard driving, it says you should purchase the other spring kit.
and if you are doing hard driving, it says you should purchase the other spring kit.
you mis understood what I said.
"hard driving" as in dedidacted track car, rally car...
not just "driving" there is no such thing as "easy driving" in my vocabulary.
hard driving means you are going to be putting much more stress on your drive line and axles and everything then just motoring hard around corners.
"hard driving" as in dedidacted track car, rally car...
not just "driving" there is no such thing as "easy driving" in my vocabulary.
hard driving means you are going to be putting much more stress on your drive line and axles and everything then just motoring hard around corners.
Hello There. How Hard Is It To Change From Drum To Disc. Im New With Rx7s And I Can Get The Rear End Or Just The Disc Set Up From Another Rx7, Will They Fit Right In? Will I Need To Do Anything?
Joined: Dec 1999
Posts: 7,855
Likes: 517
From: Behind a workbench, repairing FC Electronics.
Originally Posted by Brianhsval
Mazda recycling IIRC it was $250 shipped.
Dare I give out my cheap source of parts...
Thread
Thread Starter
Forum
Replies
Last Post
risingsunroof82
1st Generation Specific (1979-1985)
8
Sep 7, 2015 01:11 PM
Apoc3D
2nd Generation Specific (1986-1992)
10
Sep 5, 2015 10:24 AM






