Fennix_sr

well im going to be going to work for a while soon i know alot of this is expensive but... i will have my ways soon

heres a somewhat list of what i will be doing to my project 1980 GS

its going to take a while and money... but i will soon have those 2 things im just dreaming everything up right now and starting to look into it a little more.

Engine:
ceramic apex
2 Oil coolers in a row
Retained Gear Race Rotors x2 -------------------------------
Peripheral Port Housing 12A---------------------------------
Intake Manifold O-ring for MFR Housings---------------------
Carbon Race Apex Seals 12A----------------------------------
Mazda Factory Race Rotor Bearing----------------------------
Type I Modified Stantionary Gear 12A Rear-------------------
Type I Modified Stantionary Gear 12A Front------------------

Ignition
MSD Hi vibration resistance Blaster 2 coils -----------------
MSD 6AL Performance Ignition Box ---------------------------
Greddy Racing Spark Plug------------------------------------
HOLLEY Annihilator Race Cell - 630 Amps---------------------
Induction and Intake
Weber 51 IDA Carburetor--------------------------------------
Weber Peripheral Port Manifold-------------------------------
K&N Air Filter kit For 51 IDA Weber Carb---------------------
Weber Phenolic Intake Spacers--------------------------------

Exhaust system:
Racing beat (uncollected) Road Racing Header for 12A---------
Split dual 3inch straight pipes from uncolected header
that exit underneath the each door. about
Obviously large exhaust ports
-------------------

Transmission: 5 Speed (from GSL-SE)--------------------------
Flywheel: Aluminum Flywheel 12pnd----------------------------
Drivetrain: Fully locked posi RWD----------------------------
Clutch:racing beat 4 Puck Race Clutch Disc-------------------
Preasure Plate:racing beat Race Pressure Plate---------------
Ring & Pinion Gear Ratio: 5.125------------------------------

Wheels:15" Panasport Aluminum Rims and 205/50 RE71a tires----

Torque Brace:Racing Beat Engine Torque Brace-----------------
Control Arms:Racing BeatAdjustable Front and back Lower
Control Arms-------------------------------------------------
Camber/Caster Adjuster Kit-----------------------------------
Sway Bar - Front---------------------------------------------
Sway Bar - Adjustable Rear----------------
can anyone tell me some vital things i would be missing, i know im missing alot like fuel pumps lines brakes other internal and external ,any extra info would be great.
need constructive criticism it will be drag/track
although ive been told that no track in canada will allow me to run a rotary peripheral port.... hehehe still its going to be drivin on the road , just not daily... heheh
anyway flame away if ya feel the need
btw just curious ive been told peripheral ports can rev to 13000rpm... im probly wrong tho heheh
I KNOW ITS GOING TO BE LOUD, i just rebuilt my harddrive and lost all my videos and sound clips, does anyone know where i can find some good ones of a 12A PP engine

Fennix_sr

and the color of this beast is going to be either realy dark flat black, or a deep crimson red

operation 12k RPM

Rx7carl

Did you win the lottery?

mwatson184

I don't understand why you would want a pp 12a over a turbo 13b. you can get just as much or more power out of a turbo for less money, and it will be daily drivable. That is just my opinion. I have never driven a pp though so i can't really compare to my turbo.

-Marques

Pedestrian X

Sounds sweet, you will have to let me come check it out once you get it underway. You listed cermamic apex, then Carbon Race Apex Seals?

fitzwarryne

We all have our wish lists. What events are you going to compete in?

I agree with mwatson, you can fit a 13B turbo with far more power, for half the cost and still use it on the road.

Two important things you need to include in the budget are a daily driver and a tow truck & trailer.

Rotortuner

So your going to go with MFR housings? You do realize, they are 1500 a piece and the manifold is 500 right, thats 3500 for that stuff alone another 1000 for the seals. so your up to 4500 and you still need another 2500 in oil pump, lines, gears, bearings etc. your going to have to drop about 7500 on the block and that doesnt include the flywheel, pullys, carb, ignition, plugs, wires, coils, radiator etc. If i were you and just wanted something loud and fast I would build myself a megga bridge port and run Nitrous, it would make more power than a streight NA and it would be less than half the price. Just my input.

CJG

Heath

iTrader: (11)

You will certainly want to bump up the oil pressure. I'm using an fd regulator on my 12a pp project.

fitzwarryne

Rotortuner- I thought it was normal to use something like a supra or supra turbo gearbox and custom driveshaft. Do you think stock would survive and what cost any upgrade?

Rotortuner

Depends on what your going to do. For road racing where there wont be any hard launches, the stock gearbox will work, or a 1urbo 2 gear box is best, for drag racing, ya, you will need a better trans like the supra, better drive shaft and a 9 inch rear.

CJG

cystovirus

Or he could spend 3K on lawn supplies...or a new dining room table...

fitzwarryne

and still install a 13BT or REW!

Directfreak

iTrader: (2)

Everybody responded intelligently. P-Ports are for PURE RACING Only. Anything other use is silly.

Fennix_sr

sory i thought i had stated that i knew somone that was going to be doing my own housings as the peripheral port basicaly he is going to teach me about porting and during that hes going to make the peripheral port housings
sory about the carbon ceramic, i dont know what i was thinking when i wrote it down(i forgot to delete the carbon apex ), i used racing beat products basicaly to get a list down some of the parts i will use wont be exactly matching to that list, its more of a guideline... and as far as the 13B turbo... i thought hmmmm yea, but i dunno i love the 12A 13Bs are awsome i just like the 12A alot more no i didnt win the lottery who knows... boost may come into play with the 12A PP this car is a "project car" plans have just begun, but im not going to count my chickens befor they hatch, but like i said if things go as planned for work i will be able to do this project i thought i would share my little dream with fellow rotary addicts.

Fennix_sr

honestly it will maybe get a road drive rarely but i want a monster for drag, and track

Fennix_sr

another question, just a curiousity of mine what about a 12A peripheral port Supercharged... im not gonna do this but i have wondered if the high revs and supercharger would mix well... i think it would make an insane engine hehe but im just curious anyone know of any 12A pp SC's

Fennix_sr

that is true aswell i already had plans for a 12A SP daily driver tow truck... welll hehehe we will talk about that in a year or 2 when the monster is done i have alot of work planned for working on My 2 rx-7's this year who knows like so many plans i might think differently befor making a track drag car and just make a realy nice daily driver, i dont want 13B turbo i know they make great power cheaper but ill go 12A turbo way befor i go 13B
hehehe so many plans...