1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

Heater. :D

Thread Tools
 
Search this Thread
 
Old 09-30-04, 02:13 PM
  #1  
'84 RX-7 GSL

Thread Starter
 
sixstar's Avatar
 
Join Date: Aug 2004
Location: Tulsa, Oklahoma
Posts: 266
Likes: 0
Received 0 Likes on 0 Posts
Talking Heater. :D

I took every little peice of my air conditioner out, and I kinda took my heater coil out too....

I would have put it right back but I bent the copper tubing.
So now my heater coil is in my engine compartment.

I'll have pics later, just thought it was kinda funny.
Old 09-30-04, 08:53 PM
  #2  
Function > Form

 
rotor vs. piston's Avatar
 
Join Date: Nov 2002
Location: Catonsville MD (baltimore suburb)
Posts: 10,890
Likes: 0
Received 3 Likes on 1 Post
I took all of my HVAC stuff out, saves ~25lbs. Good start on your weight reduction
Old 09-30-04, 08:55 PM
  #3  
I'll Apex YOUR Seal

 
Mr BiG G's Avatar
 
Join Date: Jul 2003
Location: Mississauga, Ontario - Canada
Posts: 972
Likes: 0
Received 0 Likes on 0 Posts
wat components are under the dash to take out and how much work is involved? right now i have my a/c compressor and condensor and lines off. wats next?
Old 10-01-04, 04:56 AM
  #4  
Senior Member

 
Felgar's Avatar
 
Join Date: Nov 2003
Location: Calgary, AB
Posts: 457
Likes: 0
Received 0 Likes on 0 Posts
Under the dash for the A/C is quite easy. It's right in the middle of the passenger seat area. There's a large 'box' where you can see the tubes coming in through the firewall. IIRC, there's a bolt at the top, one at the bottom, and two straps that connect the box at each side to the other parts of the vent system. Quite easy to remove, just get yourself upside-down under the dash and you'll see.

Only problem is you'll need the piece of plastic that bridges that gap out of another RX without air or you'll be disconnecting all your vents from the fan.
Old 10-01-04, 05:08 AM
  #5  
Rotary Enthusiast

 
H4Inf's Avatar
 
Join Date: Aug 2004
Location: The World
Posts: 1,100
Likes: 0
Received 0 Likes on 0 Posts
hehe, just a question. I recieved my car with the Air Conditioning pump already removed... Problem is that if you press the AC button on the dash, it blows the fuse for the whole system. Any ideas where I should be looking to find the short?

Lookin forward to those pics =)
Old 10-01-04, 08:11 PM
  #6  
Senior Member

 
Felgar's Avatar
 
Join Date: Nov 2003
Location: Calgary, AB
Posts: 457
Likes: 0
Received 0 Likes on 0 Posts
Yeah look at the top of the in-dash compartment I was talking about. Near the bolt that attaches it to the roof of the firewall is a little module where the wires from the switch connect to. Those wires must be shorting out on each other.

If that compartment is already removed (ie. there are no pipes going through your firewall) then look directly behind the glove box, underneath the dash.
Old 10-02-04, 02:34 AM
  #7  
Rotary Enthusiast

 
H4Inf's Avatar
 
Join Date: Aug 2004
Location: The World
Posts: 1,100
Likes: 0
Received 0 Likes on 0 Posts
I found the connections. I unplugged the AC connector but it still blows fuses. The problem is in the switch, so I'll replace that. Cheers for the help =)
Old 10-02-04, 03:25 AM
  #8  
Banned. I got OWNED!!!
 
Gregs's Avatar
 
Join Date: Nov 2002
Location: KING COUNTY, WA
Posts: 4,980
Likes: 0
Received 0 Likes on 0 Posts
Originally Posted by H4Inf
hehe, just a question. I recieved my car with the Air Conditioning pump already removed... Problem is that if you press the AC button on the dash, it blows the fuse for the whole system. Any ideas where I should be looking to find the short?

Lookin forward to those pics =)
interesting, i had the same problem on my 81, however it never had a/c but it had the button for the a/c, i just made sure to never touch the a/c button,
Old 10-02-04, 03:27 AM
  #9  
a.k.a TheLatinHeat

 
DJAngelicon's Avatar
 
Join Date: Aug 2004
Location: Wyoming
Posts: 1,324
Likes: 0
Received 0 Likes on 0 Posts
Same here, I don't have a/c but it have the button for the a/c, I try not to touch it or have it on.
Old 10-04-04, 01:29 PM
  #10  
'84 RX-7 GSL

Thread Starter
 
sixstar's Avatar
 
Join Date: Aug 2004
Location: Tulsa, Oklahoma
Posts: 266
Likes: 0
Received 0 Likes on 0 Posts
Won't be able to get pics, the only person I know with a digital camera is out of town for a long while. sorry
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Shainiac
2nd Generation Specific (1986-1992)
32
03-25-07 11:03 PM
silver93
3rd Generation Specific (1993-2002)
27
11-15-05 08:20 PM



Quick Reply: Heater. :D



All times are GMT -5. The time now is 04:24 AM.