Ok, so I took my upper intake manifold off a while ago and I guess I missed where a couple things went. I tried looking in the fsm but I cant find what Im looking for.

Anyways, I cant figure out where to hook up the hoses on what seem to be oil injectors? on the LIM.

also

There is a vacuum nipple right on the center of the LIM.

Where should these be hooked up to?

Thanks

 

bump bump bump...





Need I post pictures ??

 

Ok, the oil injector ones were easy as pie, however Im still left with the single vacuum niple on the manifold open.

its right above the center ports on the manifold, and reads vacuum from both rotors, wheeere does it go?

 

There is a vacuum routing digram floating around somewhere that has been colored in. Have no idea where it's at though. Pages 4B-2,3,4 and 13 in the 85 FSM should answer all your questions.

 

Does this help?

https://www.rx7club.com/1st-generation-specific-1979-1985-18/13b-color-vacuum-diagram-656912/

If that doesn't cover what yopu need, let me know and I'll try to guide you through it.

 

I'm fairly sure that the one from the intake goes to the bottom nipple on the side of the dynamic chamber facing the front of the vehicle.