Zyrano

I'm trying to find some extra struts and I'm wondering if the gsl-se front struts are the same as the 84-85 big bearing units? I know the rotors are the different, but not sure about the actual struts.

Thanks,

alvin

pinoyremix

if you are looking aftermarket, they all use the same from the 79-85...

dbragg

iTrader: (7)

yes, all 84-85 are the same

Zyrano

Just to clarify, it's not the struts, (i already have konis), but I need a replacement upright, and I think I can get a hold of some gsl-se ones, just wondering if they'd work on my 82 (which are running 84-85 12a uprights.

Siraniko

iTrader: (13)

All FB struts will bolt up to all pre-86 RX-7 including RX-3 and RX-4.

waysrx7

Just remember '79 and I think '80 as well had struts that were about an inch taller/longer so your inserts (konies) probably wont fit in them.

Siraniko

iTrader: (13)

my bad. I misread his multiple comments. if its the strut cartridge, the 79-80 are longer than 81-85

justint5387

iTrader: (1)

Alvin, your Konis will fit. 81-85 use the same size strut

j9fd3s

iTrader: (3)

no! the gsl-se has a yellow paint mark, and the 12a's have an orange mark!

seriously, the parts catalog lists different part numbers, but they come WITH the shock, which is different 12a/13b, so thats no help

they do however use all the same bearings and seals and stuff between the 12a and 13b, so it probably is

Siraniko

iTrader: (13)

GSL-SE and non-SE has the same strut tube. The cartride has a different part # as the SE is heavier

Zyrano

Wait, now i'm getting more confused. I thought that the 84-85 used a bigger bearing? So I was assuming the spindle was different between 81-83 vs. 84-85 struts? are you guys saying they are all the same?

Siraniko

iTrader: (13)

Let me double check for you tomorrow. I have both 81 and 84 spindles. As far as I can remember, they are all the same except the 84-85 has a larger outer wheel bearing.

Re-Speed.com

iTrader: (3)

1979-1980, Long Strut Tubes, Small outer bearing
1981-1983, Short Strut Tubes, Small outer bearing
1984-1985 (12A), Short Strut Tubes, Big outer bearing
1984-1985 (13B), Short Strut Tube, Big Outer bearing, Slightly different King Pin Inclination.


The SE's do have a slightly different king pin angle. Not enough to matter. They will bot up to and replace any 1979-1985.


-billy

Slammed_GSL

iTrader: (14)

Thank you Billy! You are the man!

Zyrano

Thanks for clearing it up billy!