Si13

Hi Guys, was hopeing for a quick answer to my question about gen 1's.

Do ALL gen 1's (series 1, 2 and 3) have no backseats? (ie only 2 seaters)?

And, could someone post pics of what the back area looks like, ie the whole space behind the front seats?

Thanks for any help.

RealXhausted7

The storage compartments take up some of the space that the 2+2 abroad had. Attached to the top of the storage bins is 2 metal plates that extends back about one foot. This appears to be the area that the tiny seats would have been put. I will try to take some pics tonight, but figure there is a few guys here that can help you out before then. I have decided to take the liners out of my storage bins and used this as a hiding place for a little power adder and maybe my 2 channel.

jim_chung

iTrader: (2)

Check out this thread:


https://www.rx7club.com/showthread.p...hlight=fc+rear

t_g_farrell

iTrader: (1)

All 1st gens imported to the US had the rear seats removed so that extra sheet metal could be added to pass crash testing. If you remove that sheet metal then a set of rear seats will bolt in from what I've read.

-xlr8planet-

iTrader: (3)

search a post I made, in witch I showed how I removed my interior for painting.

Mine came from factory with a rear seat

Si13

Thanks heaps for the replies guys.
RealXhausted7: Yea, those storage compartments are what ive seen, and it does look like there is the provisions for seats.
jim_chung: Cheers, nice pics, and very nice interior, confirms backseats exist!
t_g_farrell: Thanks, that makes a lot of sense, im in Australia so hopefully some over here had backseats.
-xlr8planet-: I found your body shop thread, good quality pics of the bare shell in the back, thanks.

Thanks again guys,
Looks like im in the market for a Gen 1 then ;P

Right Hand 7

Hers a pic of the backseats installed if you need it.There really isnt much space but a small child can fit comfortably.