fuel systems
#1
Full Member
Thread Starter
Join Date: Oct 2001
Location: newport news, VA
Posts: 192
Likes: 0
Received 0 Likes
on
0 Posts
fuel systems
does anyone know where i can get a good intake system to replace the stock fuel injection system, without going carb. i have a 13b extended sp. 84' gsl and i want more hp.
#2
I can has a Hemi? Yes...
iTrader: (2)
Get a 91 N/A Intake and run an aftermarket ECU such as Haltech, Wolf or SDS.
The intake ports and runners are significantly larger. Those engines put out 160hp in stock trim, and you could easily get 185-190 with the right intake,exhaust and fuel delivery. With porting...Much more.
By the way, SDS would probably easiest and cheapest if you are going to stay N/A. You don't need a laptop to program them either.
The intake ports and runners are significantly larger. Those engines put out 160hp in stock trim, and you could easily get 185-190 with the right intake,exhaust and fuel delivery. With porting...Much more.
By the way, SDS would probably easiest and cheapest if you are going to stay N/A. You don't need a laptop to program them either.
#4
I can has a Hemi? Yes...
iTrader: (2)
Originally posted by rx-7 crazy
you are my hero thanks
p.s. does it bolt right up???
you are my hero thanks
p.s. does it bolt right up???
Depends on what year 13B you are running.
It matters if you started with a 4 port or a 6 port.
If you have ported the engine, it shouldn't matter *too* much, since you more than likely opened up the ports to match better.
Intake Manifolds Differences..
#7
Senior Member
Join Date: Jun 2002
Location: Wayward Hayward
Posts: 735
Likes: 0
Received 0 Likes
on
0 Posts
Gotta ask cause I don't know...
The differences between teh 86-88 and the 85GSL-SE style 6port intake manifolds?
They bolt up the same but the 6th port actuation is different?
The differences between teh 86-88 and the 85GSL-SE style 6port intake manifolds?
They bolt up the same but the 6th port actuation is different?
Trending Topics
#8
No longer cares
Join Date: Apr 2002
Location: just a bit north of your business
Posts: 1,345
Likes: 0
Received 0 Likes
on
0 Posts
will the GSL-SE lower intake manifold bolt up to the S4 n/a upper intake manifold?
I'm doing some porting on a friends car and am wondering if we need the lower. (I don't think it stuck around when we cleaned out the garage. I have an extra upper and plenum to use)
Also would the HKS f-con work with the gsl-se ecu to then run the secondary injectors?
I'm doing some porting on a friends car and am wondering if we need the lower. (I don't think it stuck around when we cleaned out the garage. I have an extra upper and plenum to use)
Also would the HKS f-con work with the gsl-se ecu to then run the secondary injectors?
Thread
Thread Starter
Forum
Replies
Last Post
Snook
3rd Generation Specific (1993-2002)
21
09-01-15 06:32 PM
82streetracer
1st Generation Specific (1979-1985)
7
08-23-15 09:28 AM