1st Generation Specific (1979-1985) 1979-1985 Discussion including performance modifications and technical support sections

front moldings clips

Thread Tools
 
Search this Thread
 
Old Nov 13, 2010 | 05:56 PM
  #1  
Bluezone's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
iTrader: (1)
 
Joined: Apr 2003
Posts: 215
Likes: 0
From: Miami
Unhappy front moldings clips

My car is almost done at the body shop but they accidentally broke some of the clips that go under the moldings directly in front of the drivers side window. Victoria british only sells the clips with the entire molding for $150. anyone know where i could get just the clips?
Reply
Old Nov 14, 2010 | 03:22 AM
  #2  
7aull's Avatar
RX HVN
Tenured Member 15 Years
iTrader: (2)
 
Joined: Jan 2003
Posts: 3,889
Likes: 229
From: Arizona
?? clips? I thought the A-pillar moldings were attached with screws? Ah, but maybe the clips attach with screws? You can get "clip-kits" from your glass shops, or likely find same on ebay right now, they list all the time for about $15 a set. 79-83 versions, as well as 84-85, so you'll want to get the right one! I thought these were for the upper and lower fr moldings, but maybe has side molding A pillar clips too?

Hope you/body shop kept track of the "dums" (shaped gasket) that sit under the moldings at both ends? NLA items now.

Stu Aull
80GS
Alaska
Reply
Old Nov 14, 2010 | 05:34 AM
  #3  
boyee's Avatar
keep it original!!
Tenured Member: 20 Years
Liked
iTrader: (3)
 
Joined: Oct 2005
Posts: 1,329
Likes: 8
From: SF Bay Area, California
actually i think two corners of the "dums" are still available. i wonder if you buy 2 of each and just flip one of each around then youd have a complete set of dums
Reply
Old Nov 14, 2010 | 10:33 AM
  #4  
Keith13b's Avatar
Senior Member
Tenured Member: 20 Years
iTrader: (6)
 
Joined: Jul 2005
Posts: 566
Likes: 0
From: Orlando, FL
I'd look at VB (now Black Dragon) a bit more carefully. I bought a complete windshield moulding clip set for $15. Its there, and they install easily.
Reply
Old Nov 14, 2010 | 07:54 PM
  #5  
Bluezone's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
iTrader: (1)
 
Joined: Apr 2003
Posts: 215
Likes: 0
From: Miami
Originally Posted by Keith13b
I'd look at VB (now Black Dragon) a bit more carefully. I bought a complete windshield moulding clip set for $15. Its there, and they install easily.
I did and the windshield clips look different than the side pillar clips. the pillar clips look like they install with screws and the windshield ones snap into place..i also checked mazdatrix but nothing..

think the dealer might have them?

keith, when you said "its there" did you mean the clip set you ordered came with the pillar clips too?
Reply
Old Nov 15, 2010 | 04:09 AM
  #6  
boyee's Avatar
keep it original!!
Tenured Member: 20 Years
Liked
iTrader: (3)
 
Joined: Oct 2005
Posts: 1,329
Likes: 8
From: SF Bay Area, California
for the top and bottom trim clips PN: 1243-50-609 and you need 14 of these for a complete set (3 for each side on the top and 8 on the bottom)
for the side trims the PN for the fasteners is: 8871-50-608 and you need 6 of these (3 for each side)
Reply
Old Nov 15, 2010 | 06:15 AM
  #7  
Keith13b's Avatar
Senior Member
Tenured Member: 20 Years
iTrader: (6)
 
Joined: Jul 2005
Posts: 566
Likes: 0
From: Orlando, FL
Originally Posted by Bluezone
keith, when you said "its there" did you mean the clip set you ordered came with the pillar clips too?
Yep.

http://www.blackdragonauto.com/icata....aspx?Page=100

Merry Christmas: Part # 10 or 11 depending on year. ~$9.00 - got mine shipped for about $15 out the door.
Reply
Old Nov 15, 2010 | 08:28 AM
  #8  
Banzai's Avatar
Happy Rotoring!
Tenured Member: 15 Years
Liked
Loved
Community Favorite
iTrader: (15)
 
Joined: Dec 2007
Posts: 2,620
Likes: 568
From: Iowa
Yes, the A-pillar attachment clips are plastic, break VERY easily and are held in by a single screw. They are included in with the black dragon windshield clip kit for about $15, not $150. Just got two additional sets a couple weeks ago.
Reply
Old Nov 15, 2010 | 08:32 AM
  #9  
Bluezone's Avatar
Thread Starter
Full Member
Tenured Member 05 Years
iTrader: (1)
 
Joined: Apr 2003
Posts: 215
Likes: 0
From: Miami
Originally Posted by Keith13b
Yep.

http://www.blackdragonauto.com/icata....aspx?Page=100

Merry Christmas: Part # 10 or 11 depending on year. ~$9.00 - got mine shipped for about $15 out the door.
shweeeet.. gonna order them right away. thanks and merry christmas to you too!
Reply
Old Nov 15, 2010 | 07:54 PM
  #10  
84stock's Avatar
Lives on the Forum
Tenured Member: 20 Years
iTrader: (5)
 
Joined: Apr 2003
Posts: 5,547
Likes: 12
From: calgary
I got mine locally from the dealer.
Reply
Old Nov 22, 2010 | 12:01 PM
  #11  
keithscuba's Avatar
Full Member
 
Joined: Nov 2008
Posts: 56
Likes: 0
From: London England
If you need the grey molding clips I can let you have some and also those that are screwed down to hold the windscreen -not original - all FOC -just contact me direct and I'll put them in the post - KK
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Professorpeanutrx7
New Member RX-7 Technical
0
Aug 18, 2015 03:09 PM
Marty RE
New Member RX-7 Technical
0
Aug 13, 2015 11:19 AM




All times are GMT -5. The time now is 12:12 AM.